dana 60 ujoint

I changed the rear in my 69 Coronet from a Moser 60 rear to a stock 69 Dana 60,the drive shaft has 1.188 diam. caps with outside rings,the rear yoke has 1.125 caps with inside rings, both are3.662 wide dose any body make a ujoint to fit this?
Thanks Allen

This might be a good place to check with.
http://www.dennysdriveshaft.com/c90_u_joints.html

Precision u joint does the small joint number is 315G the loathe ozone is 316 & there's a conversion joint too

I found the right u joint it is a CarQuest 2-1153. Thanks for the help