Posted By: titan
test stand, empty 727 trans case question - 10/14/12 01:51 AM
guy's, will a empty 727 Trans. case locate the starter in the proper location to work with a manual trans. flywheel for a engine run-on stand?Thanks
Posted By: sam64
Re: test stand, empty 727 trans case question - 10/14/12 02:23 AM
it should the starters are all the same.i am using a power glide adapter flywheel on mine.
Posted By: 440newport
Re: test stand, empty 727 trans case question - 10/14/12 04:04 AM
If it's a 130 tooth flywheel it should work since 727 torque convertors also have a 130 tooth ring gear I believe.
Posted By: topside
Re: test stand, empty 727 trans case question - 10/14/12 04:29 AM
No problem. For guys that don't have an empty case or bellhousing, I made a small adapter plate that holds the starter, which is what I used on mine and have been thinking about selling them. The usual 10-tooth starters work with 130 & 143 tooth flywheels/convertors according to my FSM.