big-block oil pain ID

Posted By: 6bblgt

big-block oil pain ID - 11/13/08 09:30 PM

Can anyone ID the oil pan in the center?
The "orange" one on the left is 1970-'71 440HP/6bbl/HEMI B & E-body ...
The "gray primer" one on the right is #187 big block C-body ...

What's the other one?

Posted By: 340dart4spd

Re: big-block oil pain ID - 11/13/08 09:38 PM

Quote:

Can anyone ID the oil pan in the center?
The "orange" one on the left is 1970-'71 440HP/6bbl/HEMI B & E-body ...
The "gray primer" one on the right is #187 big block C-body ...

What's the other one?

the 2 on right look identical except one has paint on it pic looks like it was taken at angle,so it looks like it might look slightly diff.. just my 2 cents

but I could be wrong

Posted By: bbodybill

Re: big-block oil pain ID - 11/13/08 10:19 PM

I would guess 62-65 big block(B body) pan... Very similar to 187 but NO numbers stamped into it.

Posted By: Scott Carl

Re: big-block oil pain ID - 11/13/08 10:20 PM

Quote:

Quote:

Can anyone ID the oil pan in the center?
The "orange" one on the left is 1970-'71 440HP/6bbl/HEMI B & E-body ...
The "gray primer" one on the right is #187 big block C-body ...

What's the other one?

the 2 on right look identical except one has paint on it pic looks like it was taken at angle,so it looks like it might look slightly diff.. just my 2 cents

but I could be wrong

Definately 3 different pans. Gray one has a sharper angle on the lower left corner of the sump than the one in the middle. That just one difference. And the sump area is smaller on the gray one. There's other subtle differences as well. Sorry, dunno what the are for tho

Posted By: JohnRR

Re: big-block oil pain ID - 11/13/08 10:55 PM

does the center pan have any baffles ? if not how much deeper is the sump vs. the 187 ?

Posted By: 64dodge572

Re: big-block oil pain ID - 11/13/08 11:48 PM

Quote:

does the center pan have any baffles ? if not how much deeper is the sump vs. the 187 ?

I know what your thinking

Posted By: dannysbee

Re: big-block oil pain ID - 11/14/08 03:13 AM

Here is a Max wedge pan.

Attached picture 4811686-maxwedgepan.jpg

Posted By: JohnRR

Re: big-block oil pain ID - 11/14/08 05:12 AM

Quote:

Quote:

does the center pan have any baffles ? if not how much deeper is the sump vs. the 187 ?

I know what your thinking

well then out with it man

Posted By: ScottSmith_Harms

Re: big-block oil pain ID - 11/14/08 05:22 AM

Dan that pan (center) reminds me of my early 413 pan. I'll look it over on Friday and post a pic

Posted By: 6bblgt

Re: big-block oil pain ID - 11/14/08 05:49 AM

Quote:

does the center pan have any baffles ? if not how much deeper is the sump vs. the 187 ?

No baffles and it appears the same depth as the other two.

Posted By: vdriver

Re: big-block oil pain ID - 11/14/08 03:23 PM

I've pulled quite a few pre '67(?) big blocks outta c-bodies with that pan; don't know the exact years tho..early '60's up to '66..??

Just about a month ago I got one out of a '66 Newport 383.

The sump is slighly larger & the notch is more angular than the 187/699.

Posted By: 64dodge572

Re: big-block oil pain ID - 11/14/08 03:32 PM

Quote:

Quote:

Quote:

does the center pan have any baffles ? if not how much deeper is the sump vs. the 187 ?

I know what your thinking

well then out with it man

If it had been 1" or so deeper and baffles, 66-9 street hemi

Posted By: JohnRR

Re: big-block oil pain ID - 11/14/08 09:55 PM

Quote:

Quote:

Quote:

Quote:

does the center pan have any baffles ? if not how much deeper is the sump vs. the 187 ?

I know what your thinking

well then out with it man

If it had been 1" or so deeper and baffles, 66-9 street hemi

but it's NOT