Posted By: tinman68
steering adjustment - 11/11/08 12:22 AM
has anyone tried anything to tighten up the steering, not adjusting the box (mine's a 2 year old firm feel, still too loose). I thaught a steering stabelizor might help? ANY SUGGESTIONS
Posted By: RapidRobert
Re: steering adjustment - 11/11/08 11:19 AM
manual or power & is the play in the box or in the linkage
Posted By: Anonymous
Re: steering adjustment - 11/11/08 12:43 PM
ive got a firm feel revbuilt TA box just installed and I have a slight amount of dead spot going straight ahead too. its not the coupler (changed it and its tight) and its not the linkages or ball joints.
I was going to call them and ask about it.
Posted By: tinman68
Re: steering adjustment - 11/11/08 05:53 PM
Thanks i'm not being understood. I'm not talking play or wear in box or tie rods etc. This power steering box is typical chrysler turns too easy. I'm want to make it fiie tighter / firmer. will a steering stabilizer help????
It's A stage 2 firm feel. Can't remove & send back have you ever tried to remove PS box from 440 w/ headers??
I should have purchased a rack & pinion setup.
the whole experience would be much better
Posted By: RapidRobert
Re: steering adjustment - 11/11/08 05:58 PM
You would probably have to send it back & have them recalibrate it.
Posted By: Anonymous
Re: steering adjustment - 11/11/08 06:21 PM
what level firm feel did you get? I got the stage 3 and its great. Ive heard that level 1 or 2 can still feel light