Posted By: wkeggenhoff
100 hp up garde Ray Barton/mopar crate Hemi - 09/07/12 09:20 PM
Anyone buy there new cam they have ?
2 versions
50 hp flat tappet cam and lifters
100 hp flat tappet, cam, lifters springs retainers, etc
Bolt in using same pushrods from the hyd cam.
Both streetable
Posted By: hemicar1971
Re: 100 hp up garde Ray Barton/mopar crate Hemi - 09/10/12 12:20 PM
Ray Barton would just ask one the the Cam makers to make a cam to the specs he has choosen.
Since it says you live in Toronto, why not pick up the phone and call Tim Banning of FHO, for hemis only and talk to him 1-905-797-2459. He lives in Bewdley Ontario on Rice Lake just north of Port Hope Ontario so your drive to his shop is relatively short.
Posted By: RUNCHARGER
Re: 100 hp up garde Ray Barton/mopar crate Hemi - 09/11/12 01:51 AM
I agree: You'd be crazy NOT to call Tim at FHO.
Sheldon
Posted By: roadrunninMark
Re: 100 hp up garde Ray Barton/mopar crate Hemi - 09/11/12 03:46 PM
Are the factory cams in the new hemi not rollers? If they are, are they hydraulic rollers? I don't know why someone would want to switch back to a flat tappet or solid roller, unless they are making a race engine.
Posted By: roadrunninMark
Re: 100 hp up garde Ray Barton/mopar crate Hemi - 09/11/12 11:51 PM
I agree Dragula.
What is the factory cam in the new gen 3?
Posted By: roadrunninMark
Re: 100 hp up garde Ray Barton/mopar crate Hemi - 09/11/12 11:58 PM
Thanks Dustin, that is what I thought it was. I don't know why they won't make the new cams hyd. rollers then, be cheaper to reuse the lifters and not have the friction of a flat tappet?
Posted By: wkeggenhoff
Re: 100 hp up garde Ray Barton/mopar crate Hemi - 09/13/12 03:30 PM
AS FAR AS I KNOW THE RAY BARTON/MOPAR HEMIS USE ROLLER ROCKERS ONLY. IT CURRENTLY HAS A REG. HYD CAM IN NOW.TALLKED TO TIM BEFORE (FHO), HE SAYS I COULD USE A SOLID ROLLER FOR STREET, WOULD LIVE AS LONG AS SPRING PRESSURE KEPT IN CHECK.
HEARD A LOT OF BAD FEED BACK ON SOLID ROLLERS CRAPPING OUT ON STREET( LACK OF LUBE AT IDLE WAS TOLD)
TYIM SYAS ENGINE WOULD HAVE TO COME APRAT AND HAVE MACHINE WORK DONE IN ORDER TO INSTALL A HYD. ROLLER CAM(NEED MORE CLEARANCE IN LIFTER AREA FOR HYD ROLLER LIFTERS)
Posted By: HemiRick
Re: 100 hp up garde Ray Barton/mopar crate Hemi - 09/14/12 01:36 AM
oiling at idle NOT a problem if you get solid roller lifters that oil the rollers and while you're at it convert to pushrod oiling too. A solid roller will work fine on the street with these parts.
