dome lamp wiring on 67 coronet

Posted By: deaks

dome lamp wiring on 67 coronet - 08/28/12 06:16 PM

Can anyone tell me where the dome lamp plug connects to, i've been under the dash but cant find a connector for it.
Mick

Posted By: JohnRR

Re: dome lamp wiring on 67 coronet - 08/28/12 06:55 PM

I am not 100% sure on a 67 but it should be in the same area , BEHIND the drivers side kick panel , where the tail light harness connects , it should be its own separate connector .

Posted By: deaks

Re: dome lamp wiring on 67 coronet - 08/28/12 07:06 PM

I had a look behind there but couldn't see anything but maybe i didn't look hard enough.
Thanks Mick

Posted By: JohnRR

Re: dome lamp wiring on 67 coronet - 08/28/12 07:11 PM

It may connect to the tail light harness ? I'm going off memory and how a 68 and newer is . I do know it would be in that area because that is where the pigtail comes out .

Posted By: jimmyc340

Re: dome lamp wiring on 67 coronet - 08/28/12 07:18 PM

I believe its next to the drivers seat in the harness that goes back to the tail lights . You will probably have to pull the sill plate and carpet back but im pretty sure thats where it is. Its the orange and yellow wires

Posted By: John_Kunkel

Re: dome lamp wiring on 67 coronet - 08/28/12 08:45 PM

The wires are usually pink and yellow.

Posted By: JohnRR

Re: dome lamp wiring on 67 coronet - 08/28/12 10:17 PM

Quote:

The wires are usually pink and yellow.

orange is the dim-able dash light circuit.

Posted By: deaks

Re: dome lamp wiring on 67 coronet - 08/28/12 10:19 PM

Thanks everyone, i just need to look a bit harder.
Mick

Posted By: Mick70RR

Re: dome lamp wiring on 67 coronet - 08/28/12 11:02 PM

Mick, it's behind the drivers side kick panel on my Road Runner.

Posted By: rapom

Re: dome lamp wiring on 67 coronet - 08/29/12 12:51 AM

The wiring goes from the driver's side kick panel up through the front window left c-pillar

Posted By: deaks

Re: dome lamp wiring on 67 coronet - 08/29/12 10:31 PM

The plug i thought was, from the dome light, turned out to be the one in the lighting loom and the one from the dome light was missing, anyway i managed to find a plug that matched from an old wiring loom and soldered it on.
Thanks Mick