Posted By: EV2CUDA
need master cyl for low vac engine - 08/22/12 05:09 PM
Is there an aluminum master I can use to help out with power brake booster that does not see much vacuum? It on a 71 e body.
need master cyl for low vac engine
Posted By: 05dakota
Re: need master cyl for low vac engine - 08/22/12 05:12 PM
i dont think so
Posted By: Twostick
Re: need master cyl for low vac engine - 08/22/12 05:17 PM
Get an electric vacuum pump.
Kevin
Kevin
Posted By: Dodgem
Re: need master cyl for low vac engine - 08/22/12 05:53 PM
Turn the in gear idle up that's all I did for 30 years. My 509 wanted 950, my 533 1050 my 597/620 ultra dye solid wanted 1150, my 703/713 roller wanted 1250 but alas my booster finaly pooped so just took it off and went manual! buy or make a vacuum reservoir? Buy a vacuum pump.
Oh and first make sure the check valve at the booster is working and don't pump the brakes
Oh and first make sure the check valve at the booster is working and don't pump the brakes
Posted By: Dodgem
Re: need master cyl for low vac engine - 08/22/12 06:09 PM
Posted By: EV2CUDA
Re: need master cyl for low vac engine - 08/22/12 09:04 PM
I have put on 2 stock napa units and both leaked after a while. Looking for an aluminum off of something newer. I will look into an electric vac pump too.