Moparts

Paint Details 1970 Rallye Wheels

Posted By: lrtexpress

Paint Details 1970 Rallye Wheels - 08/21/12 11:09 PM

Can any one help out with some original pictures / paint codes or description of proper factory color and paint details for 1970 Rallye Wheels, are backside of rims to be painted black ? (semi gloss ?) , if back is to be black, when painting front silver are holes in rallyes to be taped off or overspray allowed thru holes
Posted By: burdar

Re: Paint Details 1970 Rallye Wheels - 08/22/12 02:00 AM

http://www.restorick.com/Resto/images/71CudaGreen73.jpg
Posted By: cdstl

Re: Paint Details 1970 Rallye Wheels - 08/22/12 02:15 AM

What color silver does everyone use and has anyone found a "hardware" version of the silver that looks close?

Thanks
Posted By: lrtexpress

Re: Paint Details 1970 Rallye Wheels - 08/22/12 02:29 AM

Thanks, looks like silver applied first to entire wheel , followed by black ( in that case maybe high gloss black) would this be considered OE spec
Posted By: RJS

Re: Paint Details 1970 Rallye Wheels - 08/22/12 02:38 AM

Quote:

Thanks, looks like silver applied first to entire wheel , followed by black ( in that case maybe high gloss black) would this be considered OE spec




Absolutely not!!!
Paint the wheel black, not so much the front, then spray the silver and let it overspray the backside.
Posted By: lrtexpress

Re: Paint Details 1970 Rallye Wheels - 08/22/12 02:49 AM

I figured that would be a lot easier / correct just uncertain on the overspray??, do you know if a paint code for silver is available, and is black is flat / semi / high gloss?
Posted By: gtx6970

Re: Paint Details 1970 Rallye Wheels - 08/22/12 03:07 AM

gloss black single stage enamel on the backside.
let it dry and flip it over to spray the ft side with non textured argent silver
no taping of the holes is required , just let it blow thru
Posted By: pa340dart

Re: Paint Details 1970 Rallye Wheels - 08/22/12 02:07 PM

Mopar Muscle Feb 1999 issue 3pg spread
they taped off the front side
sprayed back side first
they used DAP black BBQ STOVE ENAMEL #760 as a primer heat
resistant to 1300 deg
followed by Krylon semi flat black (not correct ok for driver)on
the back & inside of wheel
front was then sprayed with Krylon gray primer then top coat with ARGENT SILVER
Totally Auto & Roger Gibson Restorations are referenced for the correct Argent Silver ??
I can scan article & email if needed
tom
Posted By: lrtexpress

Re: Paint Details 1970 Rallye Wheels - 08/22/12 05:17 PM

Thanks Tom for info, if you could email the article would be great.
Posted By: RJS

Re: Paint Details 1970 Rallye Wheels - 08/23/12 01:35 AM

Over the years I've used the Mopar Performance Brand wheel paint in spray cans and was very happy with the final product.
These wheels were done with it about 10 years ago.

Attached picture 7346504-DSCF0011.JPG
Posted By: cdstl

Re: Paint Details 1970 Rallye Wheels - 08/23/12 02:57 AM

Quote:

Mopar Muscle Feb 1999 issue 3pg spread
they taped off the front side
sprayed back side first
they used DAP black BBQ STOVE ENAMEL #760 as a primer heat
resistant to 1300 deg
followed by Krylon semi flat black (not correct ok for driver)on
the back & inside of wheel
front was then sprayed with Krylon gray primer then top coat with ARGENT SILVER
Totally Auto & Roger Gibson Restorations are referenced for the correct Argent Silver ??
I can scan article & email if needed
tom




The article:

http://www.moparmusclemagazine.com/howto/39998_chrysler_ralle_wheel_install/
Posted By: pa340dart

Re: Paint Details 1970 Rallye Wheels - 08/24/12 03:05 AM

Yup
That's the article
Thanks, My scans were too large to post here
messed them up when resized

Now How did you find that link ??
I've got 20 + years of all the mopar mags and have to search my
spread sheet (homemade) for tech articles

I don't think there's a library of articles for
High Perf Mopars, Chrysler Power, MoPerformance mags ???

Tom
© 2024 Moparts Forums