Posted By: 62440
reuse bulkhead wiring block - 08/17/12 11:54 PM
Hope that's the right term. I'm rewiring my 62 Savoy and would like to reuse my old bulkhead wiring block. Are they reusable ? I can't get the wires out. I'm thinking there is a secret trick like sticking a small screw driver in somewhere, but I'm not having any luck.
Uploaded with
ImageShack.us
Posted By: RapidRobert
Re: reuse bulkhead wiring block - 08/18/12 12:02 AM
get a mini eyeglass screwdriver & insert it in the little notch on one of the long sides of the rectangle on the front side & Carefully flatten the locking tang on the back side of the brass terminal. Keep trying and do not bend/force anything or lever the screwdriver too far to the side which would damage the bulkhead & when you have it depressed the right amt the wire/terminal will easily pull out of the back side
Posted By: 62440
Re: reuse bulkhead wiring block - 08/18/12 12:23 AM
Thanks Robert. That did the trick. Just took a bit more push than I expected.