Posted By: Provan
ID this old mopar wrench - 08/12/12 12:10 AM
This was in a box of mopar parts I just got.. Any ideas??? Thanks
ID this old mopar wrench
Posted By: mikemee1331
Re: ID this old mopar wrench - 08/12/12 12:17 AM
well, how about a tool for removing an antenna bezel or bezel from a switch? 
Posted By: Provan
Re: ID this old mopar wrench - 08/12/12 12:37 AM
Yes Thats what im thinking, I do not have any antennas around, im going to see if it fits anything on my friends 67 r/t tomorrow.. Just thought I would post, just in case
Posted By: moparpollack
Re: ID this old mopar wrench - 08/12/12 02:27 AM
Spanner wrench for the rear axle adjustment.
Posted By: Ron_M
Re: ID this old mopar wrench - 08/12/12 03:20 AM
I was thinking fuel tank sender lock ring or something to grab the alternator to tension the belt but I'm not sure as it seems too small for a lock ring and not strong enough for the alternator.
Posted By: Provan
Re: ID this old mopar wrench - 08/12/12 02:50 PM
thanks for all the suggestions, But I guess I was too stupid to mention its size.. its only 5" long, and the space between the 2 teeth or tabs is 3/4" center to center of tabs.and wrench is only 1/2" wide
Posted By: JulesdaWiperman
Re: ID this old mopar wrench - 08/12/12 02:56 PM
Bottle cap opener. 
Jules
Jules