Moparts

plug wires

Posted By: red 69 runner

plug wires - 07/14/12 07:29 PM

Does anybody know if they make 8mm plug wires for a 1969 383HP with manifolds.oem wires are 6 90 degree ends and 2 straight ends.I got a set of MSD wires and the ends were all straight so I returned them without seeing if they would work.Probably should have kept them because if they make an oem set I have yet to find them,any help would be apprieciated.
Posted By: RapidRobert

Re: plug wires - 07/14/12 08:38 PM

Not sure what is available but you could buy a 90 deg set if need be & recrimp on 2 straight ends. Unless corroded the brass terminals are bullet proof & can handle a recrimping & as you know it's the wires themselves that go bad
Posted By: red 69 runner

Re: plug wires - 07/14/12 08:59 PM

Thanks
Posted By: mikemee1331

Re: plug wires - 07/14/12 10:45 PM

Quote:

Not sure what is available but you could buy a 90 deg set if need be & recrimp on 2 straight ends. Unless corroded the brass terminals are bullet proof & can handle a recrimping & as you know it's the wires themselves that go bad


good option and i believe Firecore will custom make a set to your spec's if you have the coin.
Posted By: can.al

Re: plug wires - 07/15/12 01:55 AM

..buy the wires of your choice and get a set of 90 degree terminals from summit.
they are very easy to crimp on and the crimping tool is only a few dollars...changed all mine to 90 at the cap for a neater/better fit.
Posted By: sunroofgtx

Re: plug wires - 07/17/12 07:26 PM

We already make that specific set. $90 and be done with it. They are the same 8mm wires used on most of the F.A.S.T. and Supercar Racecars. Our set is actually the same routing and everything as stock, but a better fit. They also fit in all of the stock looms.




Low Deck

Posted By: AdamR

Re: plug wires - 07/17/12 08:07 PM

Quote:

We already make that specific set. $90 and be done with it. They are the same 8mm wires used on most of the F.A.S.T. and Supercar Racecars. Our set is actually the same routing and everything as stock, but a better fit. They also fit in all of the stock looms.




Can you do the small block wires in orange ?

Low Deck




Posted By: sunroofgtx

Re: plug wires - 07/19/12 09:47 PM

Yes we can. What year, 72? Orange wires are a little bit pricier. The OEM routed orange Max Wedge sets we sell are $135, and are on the quickest F.A.S.T. Max Wedges running. Thank you
Posted By: fullmetaljacket

Re: plug wires - 07/19/12 11:18 PM

You can't go wrong with Rick's Firecore wires.
Posted By: 70Cuda383

Re: plug wires - 07/19/12 11:25 PM

Quote:

You can't go wrong with Rick's Firecore wires.




say whaaaaa?! Rick's stuff is junk!





(FYI, the above comment is off base. I won't buy another brand of spark plug wire. ever. Rick's stuff is top notch!!)
Posted By: AdamR

Re: plug wires - 07/20/12 01:22 AM

Quote:

Yes we can. What year, 72? Orange wires are a little bit pricier. The OEM routed orange Max Wedge sets we sell are $135, and are on the quickest F.A.S.T. Max Wedges running. Thank you




Its a 73 Duster 340. Bought the Mopar wires and they are to short
Posted By: 451Mopar

Re: plug wires - 07/20/12 08:07 AM

Have any pictures of the big block plug wires for use with the TTI headers. I'll be getting some firecore wires after I get the hood/scoop finished, but would like to see what looms/routing are used with the wires.
© 2024 Moparts Forums