Posted By: torqueaddict
What carb and intake combo are you guys running?! - 07/05/12 08:29 AM
Hey on your Big blocks and Strokers what intake and carb combo are you guys using. The guy building my motor offered to sell me this Holly carb at
http://www.summitracing.com/parts/HLY-0-4781S/?rtype=10He offered it for 350 and it looks rather new, I want to try and get an affordable combo that gives me good performance. The power ban for my cam is 1800-6000 rpm's and I want to use the 4 barrel 6 pack looking air cleaner so I know intake height is an issue. I just want to see what components you guys own and love that are affordable.
Posted By: quickd100
Re: What carb and intake combo are you guys running?! - 07/05/12 11:05 AM
The old tryed and true 850 double pumper is hard to beat. As for me....well I think I'm the only guy running a 605 Hemi with a Weiand tunnel ram and 2 850 Thermoquads.Dave
Posted By: 6PACMAC
Re: What carb and intake combo are you guys running?! - 07/05/12 01:31 PM
Holley Street Dominator is a good, power making manifold that is not too high for clearance issues . Like said above, the 850 dp is a good carb.
Posted By: Silver6Pak
Re: What carb and intake combo are you guys running?! - 07/05/12 02:23 PM
Sometimes, bigger aint always better, as the old saying goes. The best bet is to look up flow charts online and then have access to a dyno to tune in whichever carb you decide to get. I'd say no less than a 750. But it's funny how the dirt track guys can turn out 500+ HP using a single-line 600.
Posted By: rth
Re: What carb and intake combo are you guys running?! - 07/05/12 02:35 PM
i run a 750 vac sec holley and edelbrock performer. mines a mild 440 total street cruiser.
Posted By: Prince_Valiant
Re: What carb and intake combo are you guys running?! - 07/05/12 03:50 PM
On my 408 stroker for my truck, I undersized it a bit...running an eddy rpm air-gap w/ a holley street avenger 780cfm on it. Works great. Stock gears and stockish TC.
If going with a DP, if you've got a manual trans, it's all good...nothing better. If you've got an auto, make sure you've got a higher stall T/C...
Posted By: dynamite
Re: What carb and intake combo are you guys running?! - 07/05/12 04:15 PM
Eddy performer RPM and the Holly Street Avenger 870,,perfect for a auto trans big inch Mopar..
Posted By: gch
Re: What carb and intake combo are you guys running?! - 07/06/12 01:32 AM
On my mild 496 I run an old Edelbrock CH4B and a Holley 750hp mech secondary.I have run it with an 850 but the heavy pig has better throttle resonse with the smaller throttle bores.
When I was running 3.23-3.55 gears and smaller headers it ran strong with a modified 750 vacuum secondary with the choke horn milled.
I have run the street dominator as well but I prefer the better idle and low end of a dual plane intake with my big ol girl.
Posted By: frank
Re: What carb and intake combo are you guys running?! - 07/06/12 03:49 AM
850 double pumper on a Holley Street Dominator intake for my 496
Posted By: Dougsmopars
Re: What carb and intake combo are you guys running?! - 07/06/12 04:02 AM
Street dominator and 850 TQ on my GTX the Bee has a Street dominator with a 750 Vac secondary Quick fuel carb. Bee is a 4 speed with 3;55 gears. Runs strong
Posted By: rck850
Re: What carb and intake combo are you guys running?! - 07/06/12 05:11 AM
My mild 440 has an 800 Holley/proform main body double pumper on top a mopar M1 single plane. Since I got it all sorted out last week it flat out runs!
Posted By: AndyF
Re: What carb and intake combo are you guys running?! - 07/06/12 05:17 AM
Super Victor with a carb spacer.
Posted By: 451Mopar
Re: What carb and intake combo are you guys running?! - 07/06/12 05:18 AM
770 street avenger on RPM intake on the 505" stroked 440, but it's too tall for the stock '69 Coronet hood. Street Dominator would have fit better.
Posted By: Mr.Yuck
Re: What carb and intake combo are you guys running?! - 07/06/12 03:03 PM
Stock 440-6 pack...I love it. But it's hard to beat and old school Holley DP.
Posted By: Exit1965
Re: What carb and intake combo are you guys running?! - 07/06/12 03:05 PM
Mighty demon annual booster on top of an edelbrock performer RPM. With a 1/2" phenolic 4 hole spacer inbetween. The spacer really helped my idle out (248/254 cam) as did the idle-eze of the Demon.
Posted By: ZIPPY
Re: What carb and intake combo are you guys running?! - 07/06/12 03:41 PM
Victor 383, a phenolic 1" open spacer and a 1000cfm
Race Demon.
Posted By: 1962Savoy
Re: What carb and intake combo are you guys running?! - 07/06/12 04:55 PM
super Victor and 1050 dommy
Posted By: 67Satty
Re: What carb and intake combo are you guys running?! - 07/06/12 05:09 PM
Holley 850 double pumper and Edelbrock Performer RPM intake with a 1/2" 4 hole carb spacer on my 440.
