fan shroud

I need some help. I have a 67 barracuda 273 V8 no A/C. My radiator# is 2785973. I am not sure if this is original. I am looking for a fan shroud to fit this radiator. I know it is 22 in with 13 1/4 spacing. Can any one tell me if this is the original radiator and what fan shroud# would fit this.

Any information will be appreciated.

Thanks Steve
mrbubbles66@msn.com

Thats the factory rad..... http://www.mopar1.us/radiator.txt

Steve,

The fan shroud you're looking for is Mopar Part Number 2785312. It's a one year only (67) fan shroud - the 68 and 69 Barracuda 22 inch radiators are slightly different, and the fan shrouds are not interchangeable to a 67...

This shroud falls under the category "unobtanium"...

Glenn
67 Barracuda Convertible (PP1)
68 Road Runner (LL1, 69,000 Original Miles)

Jim's Auto Parts, Legendary Auto Interiors, Coker Tire

Glenn

Thanks for the info. Sound like I have my work cut out for me to try and find one.

Steve

Steve,

No problem! There was a guy at Carlisle this past year that had two of them - restored, in very nice condition...IIRC, he was asking $200 each - then again, they do fall into the "unobtanium" category - sorta like the lower deck lid trim on the 67 Barracudas...

Glenn
67 Barracuda Convertible (PP1)
68 Road Runner (LL1, 69,000 Original Miles)

Jim's Auto Parts, Legendary Auto Interiors, Coker Tire

Steve,

Just sent you a PM - contact me if I can be of further help...

Glenn
67 Barracuda Convertible (PP1)
68 Road Runner (LL1, 69,000 Original Miles)

Jim's Auto Parts, Legendary Auto Interiors, Coker Tire