Posted By: CUDA8U
rad hose numbers to fit 3 row champion rad? - 05/30/12 10:07 PM
my champion rad came with the top hose opposite the existing drivers and since the rad is shorter vertically i was wondering which hose to use on the bottom?
has any one had trouble lining up their tranny lines because of the diff. in the height of the hook ups?
this is an e-body big block
Posted By: JohnRR
Re: rad hose numbers to fit 3 row champion rad? - 05/30/12 10:17 PM
You didn't really expect a generic aftermarket replacement to drop right in place of a stock radiator ... or did you ???
Posted By: CUDA8U
Re: rad hose numbers to fit 3 row champion rad? - 05/30/12 10:23 PM
no s*** i'm asking e-body owners if they have a number available for hoses to fit the application.
but thanks for your great comment....again
Posted By: kilroy
Re: rad hose numbers to fit 3 row champion rad? - 06/01/12 02:56 AM
Posted By: CUDA8U
Re: rad hose numbers to fit 3 row champion rad? - 06/01/12 04:28 AM
my rad is different,the upper inlet is 8"s off the cap on the passenger side,the cap is centered 22" champion
thanks anyway
Posted By: markrr
Re: rad hose numbers to fit 3 row champion rad? - 06/01/12 02:53 PM
I had the same issue when I put a Champion in my car. I can't get you a part number now but Car Quest had the hose I needed.