Posted By: hillsidehemi
Machine shop Southern Wi, head rebuild 63 383 - 04/06/12 01:01 AM
Looking for a recommendation to get the heads rebuilt on my 1963 Dodge 383. Not a race motor just a stock rebuild. I would go up to a 100 mile radius of Madison for the right Mopar shop. What would be the price range for a head rebuild anyway? I would need all of the machining and new valves,springs, guides etc......Thanks for any input.
Posted By: MadMez
Re: Machine shop Southern Wi, head rebuild 63 383 - 04/06/12 03:50 AM
Give these guys a call. They are in Waukesha.
http://www.kilpatrickengine.com
Posted By: sthemi
Re: Machine shop Southern Wi, head rebuild 63 383 - 04/06/12 07:34 AM
Another vote for Jim Kilpatrick...
Posted By: MLR426
Re: Machine shop Southern Wi, head rebuild 63 383 - 04/06/12 09:38 PM
Pakes Engine Janesville,Wi
logan426
Posted By: 67dodge67
Re: Machine shop Southern Wi, head rebuild 63 383 - 04/08/12 02:00 AM
C&S Racing. Butler, WI, just off HWY 45 on 124th street. Talk to Clint, he's a down to earth guy when you talk to him face to face. Hands down, VERY GOOD. They did head work on my eddys and was extrememly happy with them.
Dave
Posted By: 70440+6bbl
Re: Machine shop Southern Wi, head rebuild 63 383 - 04/08/12 02:56 AM
Your prices may vary, but my '69 340 X-heads just ran $500. That included magnaflux, hardened exhaust seats, valve job, and new exhaust valves since the originals were pitted. I supplied the valve seals and new Comp Cams springs, which cost another $80.00.
Jim's a Mopar guy through and through! 
