Moparts

Crate questions

Posted By: Moonraker

Crate questions - 03/14/12 06:31 PM

Anyone know the specs on this engine?

http://www.summitracing.com/parts/DCC-5153527/

Could it be built for less than $14000?

Could you run it on the street?

How are they squeezing 470HP out of it??
Posted By: JohnRR

Re: Crate questions - 03/14/12 07:15 PM

This place has it for 12.5K

http://www.moparsupercenter.com/mopar-pe...27p5153527.html
Posted By: 540challenger

Re: Crate questions - 03/14/12 07:22 PM

Quote:

Anyone know the specs on this engine?

http://www.summitracing.com/parts/DCC-5153527/

Could it be built for less than $14000?

Could you run it on the street?

How are they squeezing 470HP out of it??



Yes you could build it for less if you use a stock 360 or 340 block and RHS. That would cut the cost down big time. Brian from IMM built a buget build that made the same HP for much less cash if i remember.


The that crate motor comes with a race block which is over kill for that HP level unless you plan on upgrading but to spend 12.5G's and ripp into the motor is a little crazy IMO.

470 HP out of a 410 eddy headed motor is no problem.
Posted By: 540challenger

Re: Crate questions - 03/14/12 07:45 PM

Here is 408 build The only thing missing is the sixpack set up i guess another 1200k for that

https://board.moparts.org/ubbthreads/show...&PHPSESSID=
Posted By: Moonraker

Re: Crate questions - 03/14/12 08:35 PM

Quote:

Here is 408 build The only thing missing is the sixpack set up i guess another 1200k for that

https://board.moparts.org/ubbthreads/show...&PHPSESSID=



Thanks for the link thats bada$$! Think I found my next project
Posted By: JohnRR

Re: Crate questions - 03/14/12 08:48 PM

Quote:

Here is 408 build The only thing missing is the sixpack set up i guess another 1200k for that

https://board.moparts.org/ubbthreads/show...&PHPSESSID=



6pk would be closer to 2k.

What heads are on the crate motor ?
Posted By: DARTH V8Я

Re: Crate questions - 03/14/12 08:54 PM

P5153849 ~ 2.02 in. Intake/1.600 in. Exhaust, 63cc Chamber
Posted By: 540challenger

Re: Crate questions - 03/14/12 09:01 PM

Quote:

Quote:

Here is 408 build The only thing missing is the sixpack set up i guess another 1200k for that

https://board.moparts.org/ubbthreads/show...&PHPSESSID=



6pk would be closer to 2k .

Ya but is should be off-set by the cost of the intake and carb on this engine. jegs prices holley 750 double pumper 385.99, air gap intake 263.99 total 649.98. So at a cost of 2k you would only need 1350 more for a sixpac set up.
Posted By: Moonraker

Re: Crate questions - 03/14/12 10:14 PM

Quote:

Quote:

Here is 408 build The only thing missing is the sixpack set up i guess another 1200k for that

https://board.moparts.org/ubbthreads/show...&PHPSESSID=



6pk would be closer to 2k.

What heads are on the crate motor ?


I would like to know this as well
Posted By: JohnRR

Re: Crate questions - 03/14/12 11:11 PM

Quote:

Quote:

Quote:

Here is 408 build The only thing missing is the sixpack set up i guess another 1200k for that

https://board.moparts.org/ubbthreads/show...&PHPSESSID=



6pk would be closer to 2k.

What heads are on the crate motor ?


I would like to know this as well



Posted above ...

Quote:

P5153849 ~ 2.02 in. Intake/1.600 in. Exhaust, 63cc Chamber

Posted By: 540challenger

Re: Crate questions - 03/15/12 01:12 AM

Quote:

Quote:

Quote:

Quote:

Here is 408 build The only thing missing is the sixpack set up i guess another 1200k for that

https://board.moparts.org/ubbthreads/show...&PHPSESSID=



6pk would be closer to 2k.

What heads are on the crate motor ?


I would like to know this as well



Posted above ...

Quote:

P5153849 ~ 2.02 in. Intake/1.600 in. Exhaust, 63cc Chamber



The heads on the 410 six pack motor should be the alum. moapr performance heads aka the edelbrock LA head with a mopar Logo on them
Posted By: Evil Spirit

Re: Crate questions - 03/15/12 04:41 AM

Here's the full specs, as listed in the Mopar Superstore ad. They list it at 450HP/475TQ. I'd say that might be a little "happy" with that size cam and unported heads

Technical Specifications P5153527
Engine type: Chrysler small-block V-8
Part Number: P5153527
Horsepower / Torque: 450 / 475
Displacement (cu in): 410
Bore x stroke (in): 4.04 x 4.00
Block: New R3 cast iron, 4-bolt main caps, dual engine mounts (Magnum & "LA")
Crankshaft: Forged 4340 Stroker
Connecting rods: Forged
Pistons: Custom Diamond Pistons
Camshaft type: Hydraulic
Camshaft lift: .508
Camshaft duration: 248° intake / 248° exhaust
Cylinder heads: "LA" aluminum big valve
Valve size: 2.02intake / 1.60 exhaust
Compression Ratio: 9.7:1
Rocker arms: OEM Style
Rocker arm ratio: 1.6:1
Recommended fuel: 93 octane
Ignition Parts: Mopar Performance Electronic Ignition Kit with Distributor & Wires
Intake Manifold: "LA" Aluminum “Six Pack”
Oil Pump: High volume pump
Oil Pan: 8-Quart Center Sump Street/Strip Oil Pan
Water Pump: Aluminum

Note:
Shown with Optional Available Carburetors.
P4349237 Center
P4349238 Outboard (2)
© 2024 Moparts Forums