Who sells axle / brake backing plate STUDS for rear end

If I want new studs and nuts for a rear end build, where do I get them?

The ones that you bolt the axle retaining plate / brake backing plate with? 5 on each side.

I never did find A source for those when I was building my rear end for the first time. After endless searching I opted to drill and tap the holes for heli coils for a 5/16 bolt.

I've never had any issues with them and I acctually like it better than the studs when I have to go in there.

Just my in case you cant find them either.

I stock those parts.

I'll be sending you an e-mail.

Larry,we just take a quality 3/8 bolt and grind one flat off the head.Works great if yo also need a longer bolt.I may have some stock ones lying around the shop.

I think Dr. diff has them ?

The studs I sell are longer than stock, so they work with all disc and drum kits.

The shank is knurled, so they don't fall out or flop around when you install the brakes.

You can also get them from Mopar under part # 3723668 bolt and 6030310 nut. Both are in stock

What is list price on those studs?

$2.80