Posted By: Anonymous
F,J,M body big block headers - 03/09/12 03:13 PM
Does anybody have any suggestions for a "NICE" full length header to fit a F,J,M body mopar with either a low deck or RB block? I have a friend putting one together and he is coming up short.
Posted By: ZIPPY
Re: F,J,M body big block headers - 03/09/12 03:41 PM
I've seen Hooker Competiton (no "super") 5903 successfully used in that combo before.
A few tubes on them had to be reworked, they definitely weren't a drop in but looked darn close.
Posted By: Anonymous
Re: F,J,M body big block headers - 03/09/12 03:49 PM
Ok, thanks. He also wants to know if there is an easy way to convert the car to manual steering.
Posted By: racealittle
Re: F,J,M body big block headers - 03/09/12 06:18 PM
TTI fall into place.
Remove the bolts, just about fall out. No torsion bars in the way. You still need to release motor mounts and jack up the motor one side at a time. It is best to have an extra set of hands to hold the header in place while getting a few bolts on. If working alone, they will fall right through to the ground if you lose grip.
Posted By: CrAzYMoPaRGuY
Re: F,J,M body big block headers - 03/10/12 02:07 AM
I used standard Hedman hedders and modified the rear tube on the driver's side. 440 1980 Cordoba LS