70 B-body - How much gap at steering box/inner fender?

I am working on a 70 Charger and the gap between the power steering gear box and the inner fender is almost non-existent. Does anyone have an idea about how wide this gap should be. The front clip on this car has been replaced so I am not surprised if this has caused it. I have also seen this on my friends Super Bee that had also been hit up front.
thx!

The steering box bolts to the K frame which bolts to the rails that the inner fenders are welded to , the steering box is close to the inner fenders , how close ???

Are the proper bolts being used K frame to frame rail and steering box to K frame , factory bolts , not hardware store bolts?

i'll check on that.