Anyone know the stock cam specs for a 65 slant 6?

trying to find the stock lift and duration for a 65 slant six, checked all of the factory service manuals and everything else I can lay hands on and cannot find it.

I'm in the middle of building my first one, this site has lots of info.

http://www.slantsix.org/

oops, wrong link! Here we go.

thanks, I was hoping someone had the info readily available.

Looking to specs on the 170, incase that was a question.

I posted the question for you on .org. Here's a link, somebody will chime in soon.

http://www.slantsix.org/forum/viewtopic.php?p=341659#341659

thanks, I appreciate it.

Can't help on duration but lift is-
I- .371 E- .364

225 is a little hotter -
I- .394 E- .390

This is from a Chilton Manual.


Tim

greatly appreciate it.

my 65 service manual only gives lift, .375 intake and .360 exhaust. my 69 service manual has 240 degrees .395 lift on the intake, 236 degrees .395 lift on exhaust, 16 degrees overlap. an engine manual i have says 1971-1977 was the best production cam at 244 degrees duration, 26 degrees overlap, .406 lift on the intake and .414 lift on the exhaust. looks like 71-77 are the hot ones, .