Rebuilder for 904 lockup torque converter

I am looking for someone to rebuild a 904 lockup torque converter. Completely stock - no racing modifications. Any good rebuilders out there?

I send them to PTC.

try WIT What-ever-it-takes or transtar.. also look up dans converters here in jerseyville il.. he rebuilds them in house..

Or send me a PM i might be able to get you one..

I just bought one from O'riellys was like 160$ no core. They offered either low or high stall I got a high stall witch is like 1800rpm's.

transtar or whatever it takes (WIT) should be about half that price..last one i bought for a a500 was approx 95, and the one i bought from dans (904)was about 125 and it was a stall

if you just want a stock unit I always use Dacco.

It appears that Transtar sells its torque converters under the Pro-King brand name. Looks like NAPA and Advance sell Pro-King. I don't really care about cost so much (within reason) but I do want a quality rebuild. I don't want to have to redo this job!

Quote:

---

It appears that Transtar sells its torque converters under the Pro-King brand name. Looks like NAPA and Advance sell Pro-King. I don't really care about cost so much (within reason) but I do want a quality rebuild. I don't want to have to redo this job!

---

well up until last year I used on average 10-12 of daaco units a week and 1000's of them over the last 25 years and have been very happy.