Posted By: Dons Dart
MSD coil blaster 2 8202 - 01/22/12 09:36 PM
I have this coil can it be laid on its side,I like the stock look on my intake,but have read were it says do not lay on its side and read were it says can be installed in any position ideas.
Posted By: Anonymous
Re: MSD coil blaster 2 8202 - 01/22/12 09:59 PM
On my bigblock I mounted it in the coil bracket but mounted the coil bracket to the inner fender with the coil vertical.
On my smallblock I used to mount them on the firewall.
Posted By: Dons Dart
Re: MSD coil blaster 2 8202 - 01/22/12 10:37 PM
Still does not answer my Question.
Posted By: Dons Dart
Re: MSD coil blaster 2 8202 - 01/22/12 10:52 PM
Ok got my answer I Google it and came right to here were there was a lot of thoughts on how to install it so up right it will be thanks Moparts.
Posted By: ademon
Re: MSD coil blaster 2 8202 - 01/23/12 02:24 AM
as a second option you can get Napa coil and use it in the original bracket, you wont feel any difference between the two.
Posted By: moparsquid
Re: MSD coil blaster 2 8202 - 01/23/12 02:55 PM
ive always mounted mine in the (on the) manifold and had no problems ,i know msd says to mount it in a verticle position.
Posted By: RapidRobert
Re: MSD coil blaster 2 8202 - 01/23/12 03:16 PM
OT, Andy makes a nice bracket to mount em vertical at the front valley holdown plate
Posted By: topside
Re: MSD coil blaster 2 8202 - 01/23/12 04:55 PM
The one on my Street Hemi has been mounted in the original horizontal position since 1987, no problems.