Duster Rear Wing Supports

Posted By: a12rag

Duster Rear Wing Supports - 10/14/08 02:10 PM

Hey all . . .was wondering if anyone has pics of the rear wing supports on the decklid for a Duster . . . also, if anyone has instructions for mounting . . .

Thanks,

Mark
A12Rag

Posted By: Dart 340

Re: Duster Rear Wing Supports - 10/14/08 02:53 PM

Actually you are in luck! The year one catalog has
both instructions and pictures in it. It might
be online also.

Posted By: Steve340

Re: Duster Rear Wing Supports - 10/15/08 12:36 AM

Factory instructions:

Attached picture 4751015-spoiler.jpg

Posted By: Dart 340

Re: Duster Rear Wing Supports - 10/15/08 12:59 AM

Cool.

I was going to put one on my 70 swinger but my wife
says no way. Maybe I'll give her it for Christmas

Posted By: 6bblgt

Re: Duster Rear Wing Supports - 10/15/08 02:42 AM

am I reading that correctly? What factory added those dimensions? I doubt it was Chrysler Corp.

Quote:

drill 4 ( 21/32" ) holes

that's huge (.65625)

for the 1/4-20 studs

on the bottom of the spoiler

I'd check the factory holes in my Challenger's decklid but it's quite a few miles away

Posted By: Steve340

Re: Duster Rear Wing Supports - 10/17/08 02:59 AM

This is a Chrysler installation sheet that came with the pedestals from the Mopar dealer.

Attached picture 4755648-spoiler2.jpg

Posted By: daniel_depetro

Re: Duster Rear Wing Supports - 10/17/08 02:24 PM

I just picked up a 1970 style Go Wing. This post will come in handy.
That does seem a little large, but at least there will be plenty of 'wiggle room'

Posted By: a12rag

Re: Duster Rear Wing Supports - 10/19/08 01:31 PM

COOL !!! Thanks heaps !!!