Previous Thread
Next Thread
Print Thread
Page 1 of 3 1 2 3
Ali G3 block from mopar #2475254
04/01/18 12:10 PM
04/01/18 12:10 PM
Joined: Jun 2005
Posts: 2,776
Ontario Canada
M
MattW Offline OP
master
MattW  Offline OP
master
M

Joined: Jun 2005
Posts: 2,776
Ontario Canada
How do you tell if you have the newest version?
Heard the other ones had issues.
Matt

Re: Ali G3 block from mopar [Re: MattW] #2475451
04/01/18 04:29 PM
04/01/18 04:29 PM
Joined: Jun 2007
Posts: 2,432
NorCal
RylisPro Offline
top fuel
RylisPro  Offline
top fuel

Joined: Jun 2007
Posts: 2,432
NorCal
The newer versions from Prefix-Arrow Racing should have added bracing on the block. In the middle of the 4 engine mounting points on the side of the block there should be a huge "X".

Also above the cam tunnel there will be additional reinforcement ribbing. Here is a pic of the block that I have:

The newest versions will have the ribbing seen here:


I don't have the newest aluminum block but one from 2014 and have never had any problems or leaks and has been run on the road course plenty of times. If there were actual problems with it then it would have shown up there.

I do need to get a second alum block for my next build though!


73 `Cuda
Instagram: @rylispro
YouTube: RylisPro
www.rylispro.com
925-214-9192
Re: Ali G3 block from mopar [Re: MattW] #2475970
04/02/18 11:49 AM
04/02/18 11:49 AM
Joined: Mar 2010
Posts: 625
Indianapolis In. usa
Quickrunner Offline
mopar
Quickrunner  Offline
mopar

Joined: Mar 2010
Posts: 625
Indianapolis In. usa
Who makes that valve cover?


05 Ram 1500 Daytona package
71 Demon Gen3 hemi drag radial project



Missin' my 9 second 70 runner!
Re: Ali G3 block from mopar [Re: Quickrunner] #2476423
04/02/18 08:58 PM
04/02/18 08:58 PM
Joined: Jun 2005
Posts: 2,776
Ontario Canada
M
MattW Offline OP
master
MattW  Offline OP
master
M

Joined: Jun 2005
Posts: 2,776
Ontario Canada
I believe Prefix Arrow does.
Matt

Re: Ali G3 block from mopar [Re: RylisPro] #2476427
04/02/18 09:03 PM
04/02/18 09:03 PM
Joined: Jun 2005
Posts: 2,776
Ontario Canada
M
MattW Offline OP
master
MattW  Offline OP
master
M

Joined: Jun 2005
Posts: 2,776
Ontario Canada
Just found out from Prefix, that Mopar released a 6.4 VVT version of the G3 aluminum block.
Also did not know that mopar has a drag pak version of the Ali G3. I will hopefully have more info tomorrow about it. It apparently has a different lifter location. Not 100% sure, as I was on my cell phone through the truck speakers.
Man if your building a G3 there are plenty of options out there.
Matt

Re: Ali G3 block from mopar [Re: MattW] #2477624
04/04/18 11:07 PM
04/04/18 11:07 PM
Joined: Nov 2004
Posts: 287
Michigan
S
SC304 Offline
enthusiast
SC304  Offline
enthusiast
S

Joined: Nov 2004
Posts: 287
Michigan
Here is a shot of the new Race block.
this is used in both the Super Charged Factory shoot out combo and the NA 426 Stocker motor.

Re: Ali G3 block from mopar [Re: MattW] #2477627
04/04/18 11:11 PM
04/04/18 11:11 PM
Joined: Nov 2004
Posts: 287
Michigan
S
SC304 Offline
enthusiast
SC304  Offline
enthusiast
S

Joined: Nov 2004
Posts: 287
Michigan
Sorry looks like i have not attached a file in this new format.

I am gonna have to read on attachments.

Re: Ali G3 block from mopar [Re: MattW] #2477630
04/04/18 11:16 PM
04/04/18 11:16 PM
Joined: Nov 2004
Posts: 287
Michigan
S
SC304 Offline
enthusiast
SC304  Offline
enthusiast
S

Joined: Nov 2004
Posts: 287
Michigan
Figured it out.

New Race Blocks

DSR Blocks.jpg
Re: Ali G3 block from mopar [Re: MattW] #2477631
04/04/18 11:21 PM
04/04/18 11:21 PM
Joined: Nov 2004
Posts: 287
Michigan
S
SC304 Offline
enthusiast
SC304  Offline
enthusiast
S

Joined: Nov 2004
Posts: 287
Michigan
The lifters are bushed for keyed lifters.
the intake lifter is rolled up as noted by Matt W above.

Re: Ali G3 block from mopar [Re: SC304] #2477780
04/05/18 10:46 AM
04/05/18 10:46 AM
Joined: Nov 2003
Posts: 1,825
NW Indiana
F
fbs63 Offline
top fuel
fbs63  Offline
top fuel
F

Joined: Nov 2003
Posts: 1,825
NW Indiana
SC304, what's the part number on that block? Thanks.

Re: Ali G3 block from mopar [Re: MattW] #2477973
04/05/18 05:53 PM
04/05/18 05:53 PM
Joined: Mar 2010
Posts: 625
Indianapolis In. usa
Quickrunner Offline
mopar
Quickrunner  Offline
mopar

Joined: Mar 2010
Posts: 625
Indianapolis In. usa
And price tag?


05 Ram 1500 Daytona package
71 Demon Gen3 hemi drag radial project



Missin' my 9 second 70 runner!
Re: Ali G3 block from mopar [Re: SC304] #2478004
04/05/18 07:31 PM
04/05/18 07:31 PM
Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
Dragula Offline
I Live Here
Dragula  Offline
I Live Here

Joined: May 2004
Posts: 12,379
Taxes & Virus's R-US, NY
I will take one or two..


'70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft)
https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car)
https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car)
https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9)

'66 Barracuda AWB Stretched nose Blown 440 Car in build stage

'71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph
https://www.youtube.com/watch?v=Znuo3jMUXTk
Re: Ali G3 block from mopar [Re: SC304] #2478085
04/05/18 10:46 PM
04/05/18 10:46 PM
Joined: Feb 2011
Posts: 1,454
Glendora Ca.
J
Just-a-dart Offline
pro stock
Just-a-dart  Offline
pro stock
J

Joined: Feb 2011
Posts: 1,454
Glendora Ca.
Thanks SC304 for the pics and info.

Looks like I need to make a few calls



"Just a Bracket car dressed up like a streetcar"
Re: Ali G3 block from mopar [Re: MattW] #2478095
04/05/18 10:59 PM
04/05/18 10:59 PM
Joined: Nov 2004
Posts: 287
Michigan
S
SC304 Offline
enthusiast
SC304  Offline
enthusiast
S

Joined: Nov 2004
Posts: 287
Michigan
the block we use is P5160169.

Comes with 4.120 Rough Bore with Lifter bushings done

Mike

Ill go take a photo of lifter bushings

Re: Ali G3 block from mopar [Re: MattW] #2478101
04/05/18 11:07 PM
04/05/18 11:07 PM
Joined: Nov 2004
Posts: 287
Michigan
S
SC304 Offline
enthusiast
SC304  Offline
enthusiast
S

Joined: Nov 2004
Posts: 287
Michigan
here is a shot of the 6.1 block i use for my 392 or 426 DPU builds.

6.1 Lifter.jpg
Re: Ali G3 block from mopar [Re: MattW] #2478104
04/05/18 11:09 PM
04/05/18 11:09 PM
Joined: Nov 2004
Posts: 287
Michigan
S
SC304 Offline
enthusiast
SC304  Offline
enthusiast
S

Joined: Nov 2004
Posts: 287
Michigan
this is the new 7.0 drag block. i call it the 7.0 liter as it was first used on our 426 NA combos.

7.0 lifter.jpg
Re: Ali G3 block from mopar [Re: Quickrunner] #2478110
04/05/18 11:22 PM
04/05/18 11:22 PM
Joined: Nov 2004
Posts: 287
Michigan
S
SC304 Offline
enthusiast
SC304  Offline
enthusiast
S

Joined: Nov 2004
Posts: 287
Michigan
Better sit down.

its probably listed at 5900 Bucks. Don't shoot the messenger.

Call your dealers for more details on pricing please.

Look on line for the Mopar performance catalog it has all kinds of details for your new Christmas lists.

Mike

FSO FEAD.jpg
Re: Ali G3 block from mopar [Re: MattW] #2478362
04/06/18 03:59 PM
04/06/18 03:59 PM
Joined: Feb 2006
Posts: 973
New Brunswick, Canada
T
TrxR Offline
super stock
TrxR  Offline
super stock
T

Joined: Feb 2006
Posts: 973
New Brunswick, Canada
What kind of power will they handle?

Re: Ali G3 block from mopar [Re: TrxR] #2478383
04/06/18 04:30 PM
04/06/18 04:30 PM
Joined: Jun 2005
Posts: 2,776
Ontario Canada
M
MattW Offline OP
master
MattW  Offline OP
master
M

Joined: Jun 2005
Posts: 2,776
Ontario Canada
Well they are in the 7's @ 3400 lbs I believe
So at least 1200 HP?
Matt

Re: Ali G3 block from mopar [Re: MattW] #2490017
04/30/18 03:16 PM
04/30/18 03:16 PM
Joined: Jun 2007
Posts: 2,432
NorCal
RylisPro Offline
top fuel
RylisPro  Offline
top fuel

Joined: Jun 2007
Posts: 2,432
NorCal
I'm a dealer for all of Prefix Performance parts now.

http://www.rylispro.com/product/prefix-performance
If anyone needs their parts or complete crate engines please let me know!
Thanks!


73 `Cuda
Instagram: @rylispro
YouTube: RylisPro
www.rylispro.com
925-214-9192
Page 1 of 3 1 2 3






Powered by UBB.threads™ PHP Forum Software 7.7.1