Previous Thread
Next Thread
Print Thread
Most common 5.7 AC set-up, motor mounts? #2522042
07/15/18 08:54 AM
07/15/18 08:54 AM
Joined: May 2005
Posts: 4,679
Florida
BDW Offline OP
master
BDW  Offline OP
master

Joined: May 2005
Posts: 4,679
Florida
Looking at Schumacher conversion mounts for Gen3. They offer a version for low mount AC compressor. What 5.7 motors have a low compressor? Don't have a motor yet, in the gathering parts mode and wondering which mounts to get.

Re: Most common 5.7 AC set-up, motor mounts? [Re: BDW] #2522349
07/15/18 11:27 PM
07/15/18 11:27 PM
Joined: Jun 2007
Posts: 2,432
NorCal
RylisPro Offline
top fuel
RylisPro  Offline
top fuel

Joined: Jun 2007
Posts: 2,432
NorCal
I have the standard Schumacher mounts non-ac though and they work great. I did ask about the AC version and Mr. Schumacher stated that they are offset on the driver side to make a compromise for the compressor.

The mounts are held on by two thick long bolts that go through the polyurethane bushing. For street use they should be fine as is, but for track use they REQUIRE a lock nut on the ends as they will eventually back out from vibration and fall off.


73 `Cuda
Instagram: @rylispro
YouTube: RylisPro
www.rylispro.com
925-214-9192






Powered by UBB.threads™ PHP Forum Software 7.7.1