G3 and 727 Trans - Moparts Forums

Register Log In Moparts Forums Gen III Hemi Tech G3 and 727 Trans

Print Thread

G3 and 727 Trans #2464839 03/11/18 05:56 PM 03/11/18 05:56 PM
Joined: May 2004 Posts: 12,383 Taxes & Virus's R-US, NY Dragula OP I Live Here
Dragula OP I Live Here Joined: May 2004 Posts: 12,383 Taxes & Virus's R-US, NY	What is needed to bolt one up? I keep hearing the pattern is the same as SBM, but the spacing is different.. '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Re: G3 and 727 Trans [Re: Dragula] #2464869 03/11/18 07:13 PM 03/11/18 07:13 PM
Joined: Sep 2011 Posts: 2,042 colorado S savoy64 top fuel
savoy64 top fuel S Joined: Sep 2011 Posts: 2,042 colorado	there is a tin spacer mopar#53032454AA and if you are ordering a torque converter the manufacturer allows for that space so you dont need to worry about it....

Re: G3 and 727 Trans [Re: savoy64] #2464958 03/11/18 10:13 PM 03/11/18 10:13 PM
Joined: May 2004 Posts: 12,383 Taxes & Virus's R-US, NY Dragula OP I Live Here
Dragula OP I Live Here Joined: May 2004 Posts: 12,383 Taxes & Virus's R-US, NY	Was going to use the one I have already '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Re: G3 and 727 Trans [Re: Dragula] #2464995 03/11/18 11:24 PM 03/11/18 11:24 PM
Joined: Dec 2010 Posts: 1,035 Missouri U.S.A. 7 71yelladustr super stock
71yelladustr super stock 7 Joined: Dec 2010 Posts: 1,035 Missouri U.S.A.	Just mated my gen III to a SB 727. ATI flexplate is all you need. No spacer 392 gen III hemi on E-85 727 trans Dana 60 10.02@134

Re: G3 and 727 Trans [Re: 71yelladustr] #2465019 03/12/18 12:06 AM 03/12/18 12:06 AM
Joined: May 2005 Posts: 784 Florida cbusters super stock
cbusters super stock Joined: May 2005 Posts: 784 Florida	Originally Posted By 71yelladustr Just mated my gen III to a SB 727. ATI flexplate is all you need. No spacer Ditto. Did have to cut out the pilot bushing.

Re: G3 and 727 Trans [Re: Dragula] #2465093 03/12/18 09:07 AM 03/12/18 09:07 AM
Joined: Jan 2006 Posts: 1,400 Trumbauersville PA ric3xrt pro stock
ric3xrt pro stock Joined: Jan 2006 Posts: 1,400 Trumbauersville PA	+1 for the last 2 replies. ATI flex plate for the G3 is all you need. Truth has no agenda, but those with an agenda make their own truth. Some of us are so open minded they only see their View

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1