92 CAD dana 44 question - Moparts Forums

Register Log In Moparts Forums Sandy's Truck Shop 92 CAD dana 44 question

Print Thread

92 CAD dana 44 question #2526207 07/24/18 01:21 AM 07/24/18 01:21 AM
Joined: Jun 2004 Posts: 767 NW PA V10nacuda OP super stock
V10nacuda OP super stock Joined: Jun 2004 Posts: 767 NW PA	Just bought a 92 Ramcharger. Front brakes needed replaced so I figured I'd repack the bearings while I was at it. When I removed the hubs I noticed only on the driver side there was a let's call it bushing that goes behind the puck inside the Hub. The passenger side did not have this bushing. At first I thought I was a piece of exhaust tubing with it cut in half. Just wondering is there supposed to be one on the passenger side as well? And what the heck is this thing called? Thanks V10

Re: 92 CAD dana 44 question [Re: V10nacuda] #2526624 07/24/18 10:11 PM 07/24/18 10:11 PM
Joined: Apr 2004 Posts: 684 Maine J jerseybud mopar
jerseybud mopar J Joined: Apr 2004 Posts: 684 Maine	Parts book calls it "drive gear spacer"- mopar 4137764 Book calls for 2 of them so it should be on both sides. Its on both sides on my 88 and 92

Re: 92 CAD dana 44 question [Re: V10nacuda] #2526752 07/25/18 07:36 AM 07/25/18 07:36 AM
Joined: Dec 2014 Posts: 5,774 ohio R ruderunner master
ruderunner master R Joined: Dec 2014 Posts: 5,774 ohio	Yes both sides. Angry white pureblood male

Re: 92 CAD dana 44 question [Re: ruderunner] #2527515 07/26/18 06:36 PM 07/26/18 06:36 PM
Joined: Jun 2004 Posts: 767 NW PA V10nacuda OP super stock
V10nacuda OP super stock Joined: Jun 2004 Posts: 767 NW PA	Thanks!!! Where did you find the drawing and parts listing at?? I could only find 94 and up diagrams

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1