Previous Thread
Next Thread
Print Thread
D600 wheel options #2413797
12/05/17 08:23 PM
12/05/17 08:23 PM
Joined: May 2003
Posts: 668
California's Tri-Valley
GB5andGY8 Offline OP
mopar
GB5andGY8  Offline OP
mopar

Joined: May 2003
Posts: 668
California's Tri-Valley
My brother recently went shopping for a trailer and came back with a 1974 D600 roll-back flatbed instead.

The 361 5-spd seems to run pretty well and we’re getting the brakes into shape, but the split-rims will have to go since the tire shops won't touch an old two piece wheel like this anymore.


Short of something expensive and custom from Alcoa, can anyone point me to a good source for 22-in 6-lug one-piece wheels that’ll work on this era Dodge? I’ve heard that this bolt pattern is also a mil-spec Rockwell 6 x 8.75, but all the used wheels that I’ve seen online with those dimensions are also two-piece and have a smaller diameter.

Any leads or ideas would be appreciated.

Thanks!

Re: D600 wheel options [Re: GB5andGY8] #2413823
12/05/17 09:04 PM
12/05/17 09:04 PM
Joined: Feb 2013
Posts: 760
Canada
C
CTD5.9 Offline
super stock
CTD5.9  Offline
super stock
C

Joined: Feb 2013
Posts: 760
Canada
I found these:

https://a1truckwheels.com/product/28157/

and these:

http://www.wheelsnowinc.com/catalog/viewItem.php?id=1117

They don't list prices though. Other then big truck wrecking yards I am not sure where someone would look for used ones.

Re: D600 wheel options [Re: GB5andGY8] #2413836
12/05/17 09:31 PM
12/05/17 09:31 PM
Joined: Sep 2011
Posts: 2,042
colorado
S
savoy64 Offline
top fuel
savoy64  Offline
top fuel
S

Joined: Sep 2011
Posts: 2,042
colorado
my brother gets his split rims on the motor home worked on at truck stops and AG stores-----yes he is getting turned away at the chain stores like big o and discount.....

Re: D600 wheel options [Re: CTD5.9] #2413947
12/06/17 12:14 AM
12/06/17 12:14 AM
Joined: May 2003
Posts: 668
California's Tri-Valley
GB5andGY8 Offline OP
mopar
GB5andGY8  Offline OP
mopar

Joined: May 2003
Posts: 668
California's Tri-Valley
Thanks for the replies, and Rednuck, thanks for the leads.







Powered by UBB.threads™ PHP Forum Software 7.7.1