Been thinking of doing this for awhile. The V6 in it now is getting a little tired so I have this hemi setting around and thought why not. Anybody on here done this? If so what do I need to get to install? No racing or pulling just normal driving. Will the V6 trans bolt up (4x4)? I have the car intake, I know I have to replace that and would like to keep the throttle cable instead of the fbw. Thanks for any help

I'd be really surprised if the V6 trans bolts up to the 5.7. Even if it did, I wouldn't expect it to live very long.

I've heard that some of the stuff from a 4.7 swaps to a 5.7, but have no experience to back it up. At least a 4.7 was an option in an 05 Dakota. I can tell you nothing interchanges between a 5.7 and a 5.9 Magnum.

An 03 full size Ram still had a cable throttle that adapted to a 5.7, might be your best choice for that. We did a 5.7 from an 03 Ram, I can tell you that early 5.7 truck intake is a pretty strange looking thing, but it sets the throttle body back and lower then most of the other 5.7 intakes.

I think wiring is going to be your biggest challenge. Hot Wire has a stand alone 5.7 Hemi harness, but it ain't cheap.
Might be worth taking your question to the Modern Hemi forum here on Moparts. Those guys deal with these things a lot. Gene