Reference for brake hose fitting sizes - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Reference for brake hose fitting sizes

Print Thread

Reference for brake hose fitting sizes #2521106 07/12/18 05:08 PM 07/12/18 05:08 PM
Joined: Dec 2007 Posts: 1,584 MD p d'ro OP pro stock
p d'ro OP pro stock Joined: Dec 2007 Posts: 1,584 MD	Looking for fitting sizes for factory disc car. I switched factory discs to MP brakes discs but their rubber lines are $59 and I would rather put that kind of money to braided lines. THe calipers they use are 80-89 diplomat cast iron single piston. I cant find a source that can tell me my stock fitting size on frame or the diplomat caliper fitting size as I would like to source these before I tear it apart. Any ideas?

Re: Reference for brake hose fitting sizes [Re: p d'ro] #2521187 07/12/18 08:31 PM 07/12/18 08:31 PM
Joined: Sep 2007 Posts: 14,889 up yours Supercuda About to go away
Supercuda About to go away Joined: Sep 2007 Posts: 14,889 up yours	FSM has that info, but I'm 250 miles from my copy. But if you go to RockAuto.com and look up the brake hose banjo bolt for the 80-89 Diplomat the specifications are there. They say there are no such thing as a stupid question. They say there is always the exception that proves the rule. Don't be the exception.

Re: Reference for brake hose fitting sizes [Re: p d'ro] #2521462 07/13/18 02:01 PM 07/13/18 02:01 PM
Joined: Jan 2003 Posts: 25,720 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,720 Rio Linda, CA	The hoses are Bendix 77221 and 77222. $5 at Rock Auto. https://www.rockauto.com/en/moreinfo.php?pk=1367690&jsn=3 The INTERNET, the MISinformation superhighway

Re: Reference for brake hose fitting sizes [Re: John_Kunkel] #2521482 07/13/18 02:59 PM 07/13/18 02:59 PM
Joined: Dec 2007 Posts: 1,584 MD p d'ro OP pro stock
p d'ro OP pro stock Joined: Dec 2007 Posts: 1,584 MD	Thanks guys. So the hose end with the clip (body side) on my stock 67 is straight. THe one on the Diplomat is a 90°. Do you think it will still fit properly?

Re: Reference for brake hose fitting sizes [Re: p d'ro] #2521567 07/13/18 07:22 PM 07/13/18 07:22 PM
Joined: Jan 2003 Posts: 25,720 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 25,720 Rio Linda, CA	I would imagine that the straight end would work best in a retrofit. This is a Bendix 77047 but there's a gazillion different ends and lengths. The INTERNET, the MISinformation superhighway

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1