Previous Thread
Next Thread
Print Thread
Edelbrock Victor Heads on 383 #2433670
01/12/18 11:59 PM
01/12/18 11:59 PM
Joined: Mar 2009
Posts: 187
Ia
4
4spdana Offline OP
member
4spdana  Offline OP
member
4

Joined: Mar 2009
Posts: 187
Ia
Port cc to big for 1/8 mile, stick, 2800#, drag car ?

12to1, .650 lift, 950cfm, 2"headers, 5.86 gear.

thinking around 7600 rpm

Re: Edelbrock Victor Heads on 383 [Re: 4spdana] #2435738
01/16/18 04:47 PM
01/16/18 04:47 PM
Joined: Jan 2003
Posts: 16,376
D
dogdays Offline
I Live Here
dogdays  Offline
I Live Here
D

Joined: Jan 2003
Posts: 16,376
It's a big mismatch in capacity, Don't do it.

R.

Re: Edelbrock Victor Heads on 383 [Re: dogdays] #2435748
01/16/18 05:03 PM
01/16/18 05:03 PM
Joined: Jan 2007
Posts: 1,668
Mi,U.S.A.
M
mike s Offline
top fuel
mike s  Offline
top fuel
M

Joined: Jan 2007
Posts: 1,668
Mi,U.S.A.
Not going to work with the 2.19-2.20 intake valve. Will need very serious parts in the short block,valve train and a fab'd intake. Ported rpm's are a better match and that will still need the best of everything.Block will limited durability. Use a 400 blk. The large cyl bore and stronger main webs open all the possibilities.


Leave the gun.......take the Cannoli's....Mike






Powered by UBB.threads™ PHP Forum Software 7.7.1