I'm trying to find out where I can get the bushing for the front of my rear leaf springs and what size I would need for a 69 charger r/t with dana 60.

If they are the same as the 67 I may have a new set in the garage. I bought new springs from ESPO a few years ago, and swapped the front bushings out for Polygraphite...

If I do, you can have them for the price of shipping...

That would be awesome and really nice of you. The ones I have now the rubber is falling out of them. I bought a kit but it only came with the ones for the back of the springs. I'll take the bushing out of it tonight and measure them and see if there the same as the ones you have.

No problem...

I did a quick check, and only found one. But the other one is surely around somewhere.

Quick check with a tape...
OD - 2"
ID - 5/8"
length - 3-1/8"

B body should be all the same those years.Id just like to know how you got the rubber bushins out without destroying the.For the price Id just use poly they are better.Rocky

They have steel inner and outer sleeves. Just pulled them out with all thread, and a couple short sections of different diameter pipe. Although, it has been three years, since I did that... boy does time fly...

Haven't found the other one yet. Spent most of the weekend on a bathroom remodel at my mother's house. But I did pick up some new batteries for my digital calipers, so I can get some better dims off the bushings...