Previous Thread
Next Thread
Print Thread
Rear brake hardware, I need help #2521260
07/12/18 11:26 PM
07/12/18 11:26 PM
Joined: Apr 2018
Posts: 7
Adrian Michigan
R
Ram man9903 Offline OP
member
Ram man9903  Offline OP
member
R

Joined: Apr 2018
Posts: 7
Adrian Michigan
I putting together the rear brakes on a 71 barracuda and only have the backing plates and drums. Where is a good source to get the rest of the hardware that goes under the drum? I need the spreader bar for the shoes, and parking brake attach point for in there too. Thanks

Re: Rear brake hardware, I need help [Re: Ram man9903] #2521268
07/12/18 11:58 PM
07/12/18 11:58 PM
Joined: Jan 2003
Posts: 5,354
Rancho Cordova, California (Sa...
hemi71x Offline
master
hemi71x  Offline
master

Joined: Jan 2003
Posts: 5,354
Rancho Cordova, California (Sa...
https://www.forabodiesonly.com/mopar/thr...-brakes.405381/

Well, you could try me, if your looking for 11's.
For your consideration.


RF-4C Phantom 69-370 Zweibrucken, Germany

Re: Rear brake hardware, I need help [Re: Ram man9903] #2521280
07/13/18 12:33 AM
07/13/18 12:33 AM
Joined: Sep 2007
Posts: 14,889
up yours
Supercuda Offline
About to go away
Supercuda  Offline
About to go away

Joined: Sep 2007
Posts: 14,889
up yours
Ever cop M body (AHB on fender tag) out there had 11" drums and will be a good donor. Other than that you'll be digging deep to find that stuff you need.


They say there are no such thing as a stupid question.
They say there is always the exception that proves the rule.
Don't be the exception.
Re: Rear brake hardware, I need help [Re: Ram man9903] #2521293
07/13/18 01:02 AM
07/13/18 01:02 AM
Joined: Jan 2003
Posts: 20,643
So Near, Yet So Far
topside Online content
Too Many Posts
topside  Online Content
Too Many Posts

Joined: Jan 2003
Posts: 20,643
So Near, Yet So Far
Get a good look at the shoe retaining spring hardware you find; last set I bought, the spring cups didn't fit the springs (they were packaged together), and the springs themselves could probably be used in a valvetrain, they were so stiff. It was parts-store stuff, not from a Mopar-specific vendor.

Re: Rear brake hardware, I need help [Re: Ram man9903] #2521299
07/13/18 01:12 AM
07/13/18 01:12 AM
Joined: Dec 2007
Posts: 18,153
Mass
DAYCLONA Offline
I Live Here
DAYCLONA  Offline
I Live Here

Joined: Dec 2007
Posts: 18,153
Mass
Originally Posted By Ram man9903
I putting together the rear brakes on a 71 barracuda and only have the backing plates and drums. Where is a good source to get the rest of the hardware that goes under the drum? I need the spreader bar for the shoes, and parking brake attach point for in there too. Thanks




You didn't state 10" or 11", but basically everything from spring components, drums, hoses, wheel cylinders, brackets, etc, etc, you need is available from Autozone/Duralast, Dorman, even Classic Industries...here just a sample for your 71 E body

brakes71cuda.JPGbrakes71cuda2.JPGbrakes71cudaa.JPGbrakescuda7135.JPG
Re: Rear brake hardware, I need help [Re: Ram man9903] #2521412
07/13/18 12:06 PM
07/13/18 12:06 PM
Joined: Apr 2018
Posts: 7
Adrian Michigan
R
Ram man9903 Offline OP
member
Ram man9903  Offline OP
member
R

Joined: Apr 2018
Posts: 7
Adrian Michigan
10 inch. Thank you







Powered by UBB.threads™ PHP Forum Software 7.7.1