Question about Moog offset UCA bushings - Disregard!!

Print Thread

Question about Moog offset UCA bushings - Disregard!! #2463784 03/09/18 03:23 PM 03/09/18 03:23 PM
Joined: Oct 2004 Posts: 1,074 So Cal, USA Fab64 OP super stock
Fab64 OP super stock Joined: Oct 2004 Posts: 1,074 So Cal, USA	Edit: Never mind, those pieces are called "ferrules" and I found these references: https://board.moparts.org/ubbthreads/ubbt...m-bushings.html https://board.moparts.org/ubbthreads/ubbthreads.php/topics/429191/moog-uca-offset-bushings.html Hi all, Sorry if this has been covered - I did several searches and could find nothing. I'm rebuilding the front end of my '71 Satellite. Here are the old bushings that I removed from my upper control arms: https://photos.app.goo.gl/NBk3waQc4HMDA5NH3 Note the metal "caps" on either end of the bushing. The new Moog offset bushings (K7103) don't have any such "cap": https://photos.app.goo.gl/vWFNPhRycXkVVRjg2 And these extra pieces came in the box: https://photos.app.goo.gl/mqAg6P0gXznMgHEw2 Are these supposed to go on either side of the new bushing? They don't fit into the holes of the new bushings. Please advise, thanks. Roger Last edited by Fab64; 03/09/18 05:17 PM.

Hop To