|
Re: Aftermarket Retainer ?
[Re: Porter67]
#2383141
10/06/17 09:47 PM
10/06/17 09:47 PM
|
Joined: Sep 2007
Posts: 14,889 up yours
Supercuda
About to go away
|
About to go away
Joined: Sep 2007
Posts: 14,889
up yours
|
part number of the hughes retainer would go a very long way to answering the question.
Hughes lists 9 different part numbers for retainers
They say there are no such thing as a stupid question. They say there is always the exception that proves the rule. Don't be the exception.
|
|
|
Re: Aftermarket Retainer ?
[Re: Porter67]
#2383173
10/06/17 10:26 PM
10/06/17 10:26 PM
|
Joined: Sep 2007
Posts: 14,889 up yours
Supercuda
About to go away
|
About to go away
Joined: Sep 2007
Posts: 14,889
up yours
|
Ok, both 1252 and 1254 are 7 degree retainers, which is what stock locks need.
Odds are the Hughes retainers were made with a bit more care and on newer tooling than the original retainers.
They say there are no such thing as a stupid question. They say there is always the exception that proves the rule. Don't be the exception.
|
|
|
|
|
|