Green loop wire on MSD digital 6? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Green loop wire on MSD digital 6?

Print Thread

Green loop wire on MSD digital 6? #999527 05/25/11 07:14 AM 05/25/11 07:14 AM
Joined: Jan 2003 Posts: 738 Columbus Ohio M mopfried OP super stock
mopfried OP super stock M Joined: Jan 2003 Posts: 738 Columbus Ohio	I have a MSD digital 6 on my 74 scamp 440 with a mallory unilite dist. The directions are not very clear on if I need to cut the green loop wire or not. Any experiance out there?

Re: Green loop wire on MSD digital 6? [Re: mopfried] #999528 05/25/11 03:20 PM 05/25/11 03:20 PM
Joined: Mar 2007 Posts: 3,277 West Coast, USA jbc426 master
jbc426 master Joined: Mar 2007 Posts: 3,277 West Coast, USA	You can go on their website and/or call their tech line. 1970 Plymouth 'Cuda #'s 440-6(block in storage)currently 493" 6 pack, Shaker, 5 speed Passon, 4.10's 1968 Plymouth Barracuda Convertible 408 Magnum EFI with 4 speed automatic overdrive, 3800 stall lock-up converter and 4.30's (closest thing to an automatic 5 speed going)

Re: Green loop wire on MSD digital 6? [Re: mopfried] #999529 05/25/11 05:14 PM 05/25/11 05:14 PM
Joined: Jun 2004 Posts: 893 Tustin, CA P pishta super stock
pishta super stock P Joined: Jun 2004 Posts: 893 Tustin, CA	Per MSD, if you are using a unilite (or any other non-magnetic trigger dist.), dont cut the green "magnetic pickup" loop. You cut it when you run a magnetic pickup distributor. Looks like there is some sort of compensation factor for retard at high RPM's with a magnetic pickup that is activated when the wire is cut.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1