318 Truck Pan?? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 318 Truck Pan??

Print Thread

318 Truck Pan?? #992613 05/15/11 08:30 AM 05/15/11 08:30 AM
Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere S S/ST 3040 OP master
S/ST 3040 OP master S Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere	I tried this post in the truck section............ I think I'm looking for an oil pan off of a 318 truck/Dakota. I need a rear sump pan but, need measurements from the pan rail to the bottom of the pan. (front and rear) Can anybody help?? Thanks in advance.

Re: 318 Truck Pan?? [Re: S/ST 3040] #992614 05/15/11 09:50 AM 05/15/11 09:50 AM
Joined: Jan 2003 Posts: 8,936 Holly/MI D Dean_Kuzluzski master
Dean_Kuzluzski master D Joined: Jan 2003 Posts: 8,936 Holly/MI	I can later, got to go out for a while. Got one in my basement. I'll check this post later. R.I.P.- Gary "Coop" Davis 02/09/68-05/13/04

Re: 318 Truck Pan?? [Re: Dean_Kuzluzski] #992615 05/15/11 09:59 AM 05/15/11 09:59 AM
Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere S S/ST 3040 OP master
S/ST 3040 OP master S Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere	Thank you. I do appreciate your help.

Re: 318 Truck Pan?? [Re: S/ST 3040] #992616 05/15/11 11:29 AM 05/15/11 11:29 AM
Joined: Sep 2003 Posts: 19,342 north of coder moparx "Butt Crack Bob"
moparx "Butt Crack Bob" Joined: Sep 2003 Posts: 19,342 north of coder	just measured a 360 truck pan. it measures 4 1/4" in the front and a tick less than 9" in the rear [tallest part of the sump]. a 318 pan should be similar, as the only difference i am aware of is the main saddle diameter is bigger on the 360.

Re: 318 Truck Pan?? [Re: moparx] #992617 05/15/11 12:06 PM 05/15/11 12:06 PM
Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere S S/ST 3040 OP master
S/ST 3040 OP master S Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere	Thanks. Would you happen to have a picture from the side?

Re: 318 Truck Pan?? [Re: S/ST 3040] #992618 05/15/11 12:33 PM 05/15/11 12:33 PM
Joined: Sep 2003 Posts: 19,342 north of coder moparx "Butt Crack Bob"
moparx "Butt Crack Bob" Joined: Sep 2003 Posts: 19,342 north of coder	here's the only one i have. it's kinda crappy. hope you see what you need. if not, i'll take a couple more. i got a new camera, and i really don't like it much...... 6634142-Picture043(Small).jpg (32 downloads)

Re: 318 Truck Pan?? [Re: S/ST 3040] #992619 05/15/11 12:34 PM 05/15/11 12:34 PM
Joined: Feb 2003 Posts: 8,670 A Andrewh master
Andrewh master A Joined: Feb 2003 Posts: 8,670	I guess it depends on if you mean 5.2 magnum or actually a 318 LA block you are planning on putting into a newer truck. when they 5.2 mag was put in, it was switched to 360 type seals. so the 5.9 and the 5.2 use the same pan. If you mean an actual 318 LA block, then the seals for the pan would be different.

Re: 318 Truck Pan?? [Re: Andrewh] #992620 05/15/11 12:39 PM 05/15/11 12:39 PM
Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere S S/ST 3040 OP master
S/ST 3040 OP master S Joined: Jul 2006 Posts: 4,595 On the south side of Nowhere	It's for my car with a 340 and tubular crossmember. Thanks for the picture. Now I need to track one down.

Re: 318 Truck Pan?? [Re: S/ST 3040] #992621 05/15/11 12:51 PM 05/15/11 12:51 PM
Joined: Mar 2003 Posts: 9,099 Rogue River, OR Jeremiah master
Jeremiah master Joined: Mar 2003 Posts: 9,099 Rogue River, OR	I am going to order one of these today: http://www.summitracing.com/parts/RNB-264-210/ I can measure it up if you want when it arrives. Not a bad price either.

Re: 318 Truck Pan?? [Re: moparx] #992622 05/15/11 12:57 PM 05/15/11 12:57 PM
Joined: Jan 2003 Posts: 5,894 Florida Locomotion master
Locomotion master Joined: Jan 2003 Posts: 5,894 Florida	Quote: just measured a 360 truck pan. it measures 4 1/4" in the front and a tick less than 9" in the rear [tallest part of the sump]. a 318 pan should be similar, as the only difference i am aware of is the main saddle diameter is bigger on the 360. The rear seal area on a 360 is smaller than on a 318. The front of the 360 and both ends of the 318 pan are the same. A pan off of a V-8 Dakota has different overall measurements. Not sure of the seal configuration on Magnum engines.

Re: 318 Truck Pan?? [Re: S/ST 3040] #992623 05/15/11 03:22 PM 05/15/11 03:22 PM
Joined: Jan 2003 Posts: 8,936 Holly/MI D Dean_Kuzluzski master
Dean_Kuzluzski master D Joined: Jan 2003 Posts: 8,936 Holly/MI	I've got a pan off of an old mid-70's RV. It has a sump that is just less than 9" too. Like 8&7/8th's. Probably the same thing as in the pic above. PM sent. R.I.P.- Gary "Coop" Davis 02/09/68-05/13/04

Re: 318 Truck Pan?? [Re: Locomotion] #992624 05/16/11 10:08 PM 05/16/11 10:08 PM
Joined: Sep 2003 Posts: 19,342 north of coder moparx "Butt Crack Bob"
moparx "Butt Crack Bob" Joined: Sep 2003 Posts: 19,342 north of coder	Quote: Quote: just measured a 360 truck pan. it measures 4 1/4" in the front and a tick less than 9" in the rear [tallest part of the sump]. a 318 pan should be similar, as the only difference i am aware of is the main saddle diameter is bigger on the 360. The rear seal area on a 360 is smaller than on a 318. The front of the 360 and both ends of the 318 pan are the same. A pan off of a V-8 Dakota has different overall measurements. Not sure of the seal configuration on Magnum engines. sorry on the mis-information. i knew one was larger, but i forgot which one it was. "oldtimers" ya know.........

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1