Previous Thread
Next Thread
Print Thread
efi conversion #985109
05/02/11 09:21 PM
05/02/11 09:21 PM
Joined: May 2008
Posts: 57
cedar rapids, iowa
S
superhog88 Offline OP
member
superhog88  Offline OP
member
S

Joined: May 2008
Posts: 57
cedar rapids, iowa
thinking of converting to mass air flow efi system remember reading a post about someone using a system off a fox body mustang was wandering what parts are needed off the mustang and what years of mustang
thans for any help

Re: efi conversion [Re: superhog88] #985110
05/02/11 10:26 PM
05/02/11 10:26 PM
Joined: Feb 2003
Posts: 8,659
A
Andrewh Offline
master
Andrewh  Offline
master
A

Joined: Feb 2003
Posts: 8,659

Re: efi conversion [Re: Andrewh] #985111
05/02/11 11:55 PM
05/02/11 11:55 PM
Joined: Jan 2003
Posts: 8,005
Tulsa OK
Bad340fish Offline
master
Bad340fish  Offline
master

Joined: Jan 2003
Posts: 8,005
Tulsa OK
While its a great system I don't know if I would put it on something on purpose. I had a 91 mustang with a heads cam and intake modded 5.0 in it. It ran 12.30s, got 17-18mpg and was a blast to drive. However it wouldn't always idle right and i could never track it down. Some days I could sit in stop and go traffic with the AC on and no problems, other days it would develop a surge or just die. It was a 5-speed as well so idle should have been even easier IMO.

It was dead reliable though it did always start and idle cold. I have to admit haveing a low 12 second daily driver that would start and idle when it was 5* outside was pretty cool. I miss that car, it could truley be driven anywhere in the country without a worry run some low 12s on the motor and drive it back home.


68 Barracuda Formula S 340
87 "Chrysler" Conquest






Powered by UBB.threads™ PHP Forum Software 7.7.1