Custom Pushrod vendor help - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Custom Pushrod vendor help

Print Thread

Custom Pushrod vendor help #983390 04/30/11 10:07 PM 04/30/11 10:07 PM
Joined: Apr 2003 Posts: 488 Wis., USA B Bob_Fromm OP mopar
Bob_Fromm OP mopar B Joined: Apr 2003 Posts: 488 Wis., USA	Need some reccomendations on custom pushrod vendors you have used or know of. thanks

Re: Custom Pushrod vendor help [Re: Bob_Fromm] #983391 04/30/11 10:27 PM 04/30/11 10:27 PM
Joined: Jan 2003 Posts: 20,464 Eagle, Idaho Neil The Doctor is in.
Neil The Doctor is in. Joined: Jan 2003 Posts: 20,464 Eagle, Idaho	I have bought a few sets from these guys and have been happy with the price and fast delivery. http://www.pushrods.net/

Re: Custom Pushrod vendor help [Re: Neil] #983392 04/30/11 10:33 PM 04/30/11 10:33 PM
Joined: Jan 2003 Posts: 20,733 A collage of whims topside Too Many Posts
topside Too Many Posts Joined: Jan 2003 Posts: 20,733 A collage of whims	Smith Bros. Been very happy with their prices, quality, and service on the last 4 motors, BB & SB.

Re: Custom Pushrod vendor help [Re: topside] #983393 04/30/11 10:41 PM 04/30/11 10:41 PM
Joined: Aug 2005 Posts: 146 Pittsburgh, PA bobdog106 member
bobdog106 member Joined: Aug 2005 Posts: 146 Pittsburgh, PA	Smith Brothers also. Called and spoke to human, had perfect pushrods custon made a few days later. 6610563-68040_1487422623306_1166139638_31161653_5530406_n.jpg (70 downloads)

Re: Custom Pushrod vendor help [Re: bobdog106] #983394 04/30/11 11:10 PM 04/30/11 11:10 PM
Joined: Aug 2003 Posts: 12,291 Kent, Wa 340SHORTY Truck Nut
340SHORTY Truck Nut Joined: Aug 2003 Posts: 12,291 Kent, Wa	you cant beat Smith Bros, Bend Or I am truckless..

Re: Custom Pushrod vendor help [Re: 340SHORTY] #983395 04/30/11 11:55 PM 04/30/11 11:55 PM
Joined: Feb 2003 Posts: 16,128 Mesa, Arizona D dart4forte I Live Here
dart4forte I Live Here D Joined: Feb 2003 Posts: 16,128 Mesa, Arizona	Quote: you cant beat Smith Bros, Bend Or Ditto!!! Smith Bros

Re: Custom Pushrod vendor help [Re: dart4forte] #983396 04/30/11 11:57 PM 04/30/11 11:57 PM
Joined: Jan 2003 Posts: 4,616 Kissimmee Fl. D dusturbd340W5 master
dusturbd340W5 master D Joined: Jan 2003 Posts: 4,616 Kissimmee Fl.	I have used Smith Bros in the past but after getting a set from Manton will never use anything else but Mantons 70 duster full chassis super pro 416 CNC Indybrock heads 727 w/brake best so far 1.212 60 6.219 in 1/8 at 110.88 9.768 at 137.81 1/4

Re: Custom Pushrod vendor help [Re: dusturbd340W5] #983397 05/02/11 01:11 PM 05/02/11 01:11 PM
Joined: Apr 2003 Posts: 488 Wis., USA B Bob_Fromm OP mopar
Bob_Fromm OP mopar B Joined: Apr 2003 Posts: 488 Wis., USA	Thanks for the help to those who responded. I contacted Smith Bros first as the majority of those who responded mentioned them. Spoke with Pierre, very helplful and knowledgeable. New pushrods will be shipped today awesome! So here's the rest of the story: 440 Source heads on my 440. Upgraded the cam to a .528 MP solid and bought the correct 3/8 pushrods for the cam (Crane or Mopar are 3/8") New 3/8 pushrods hit the intake runners. So I decided to first see if someone could make a 5/16 pushrod that would work and balance the cost against the labor and cost of pulling the heads and doing the necessary clearencing. Thanks to the Moparts crowd for the recommedations.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1