C body parts

Print Thread

C body parts #980727 04/25/11 11:44 PM 04/25/11 11:44 PM
Joined: Feb 2009 Posts: 1,274 Ontario.Canada C can.al OP pro stock
can.al OP pro stock C Joined: Feb 2009 Posts: 1,274 Ontario.Canada	..a friend called and said he scored a '72 full size Mopar with a 400 in it.(Newport?) is that early 400 anything special? i seem to remember something about '72 C body disc brakes and also the rear axle. i'm going over tomorrow to take a look before he crushes it!

Re: C body parts [Re: can.al] #980728 04/26/11 12:23 AM 04/26/11 12:23 AM
Joined: May 2003 Posts: 6,558 Downtown Roebuck Ont Twostick Still wishing...
Twostick Still wishing... Joined: May 2003 Posts: 6,558 Downtown Roebuck Ont	Quote: ..a friend called and said he scored a '72 full size Mopar with a 400 in it.(Newport?) is that early 400 anything special? i seem to remember something about '72 C body disc brakes and also the rear axle. i'm going over tomorrow to take a look before he crushes it! 400 will be a good core for a stock stroke or stroker build even if it isn't the so-called 230 block. If the car is a late build 72 it might have the 73 style spindles that take the 1 piece unicast rotors which are more desirable for C-body disc brake swaps. Even if it has the 2 piece rotors they are still good to put discs on a drum C-body. Trans will be good too. Not sure when they went to the 9.25 rear but if it has an 8.75 it will likely be a 2.76 but could be a SG so check it to be sure. Kevin

Hop To