Previous Thread
Next Thread
Print Thread
dodge magnum problem #969767
04/09/11 09:18 AM
04/09/11 09:18 AM
Joined: Feb 2007
Posts: 435
so cal,cali
C
calimoparguy Offline OP
mopar
calimoparguy  Offline OP
mopar
C

Joined: Feb 2007
Posts: 435
so cal,cali
2006 sxt ,I got problem with my tail lights.brake lights work,signals
Work,reverse lights work but when i turn lights on tail lights
Dont come on.......any sugestions where to start look

Last edited by calimoparguy; 04/09/11 10:01 AM.
Re: dodge magnum problem [Re: calimoparguy] #969768
04/09/11 10:06 AM
04/09/11 10:06 AM
Joined: Aug 2006
Posts: 1,613
Deerfield, Ohio
70dusterjohn Offline
top fuel
70dusterjohn  Offline
top fuel

Joined: Aug 2006
Posts: 1,613
Deerfield, Ohio
I know this is going to sound funny, but I had the same problem with my wifes jeep. It ended up being the turn signal switch. It pinched a wire from the tilt wheel. Replaced it and it work just fine. Oh and my blinkers and everything worked, but not the running lights. Good luck.

Re: dodge magnum problem [Re: 70dusterjohn] #969769
04/09/11 11:53 PM
04/09/11 11:53 PM
Joined: Feb 2007
Posts: 435
so cal,cali
C
calimoparguy Offline OP
mopar
calimoparguy  Offline OP
mopar
C

Joined: Feb 2007
Posts: 435
so cal,cali
well,i looked at the # 8 fuse and it was blown so replaced it with new fuse.lights worked for a bit the fuse blew again??? where should i start???

thanks for any help

Re: dodge magnum problem [Re: calimoparguy] #969770
04/10/11 11:06 AM
04/10/11 11:06 AM
Joined: Feb 2003
Posts: 8,658
A
Andrewh Offline
master
Andrewh  Offline
master
A

Joined: Feb 2003
Posts: 8,658
pull out the tail lights and front running lights and try again.
if it still blows, you have a wiring issue somewhere.







Powered by UBB.threads™ PHP Forum Software 7.7.1