Topic Options
#956349 - 03/22/11 12:23 PM 15x8 with 4.5" backspacing on 1971 cuda?
71redcuda Offline
pro stock

Registered: 09/16/10
Posts: 1327
Loc: Sweden
Hello..

Im intrested to buy a set of steeles for my cuda with original 8 3/4 rear end.

I was thinking 15x7" in front and 15x8 with 4" or 4.5" backspacing in the back of the car.

Do anyone know if there will be any problem for to fit 15x8 with 4.5" backspace wheels on the back of the car??

Will be using 255mm (10") wide tires in back

Maby i should go with 15x7" in the back instead?

thanks,

Nicklas Larsson -Sweden




Attachments
6543536-P1000064.JPG (167 downloads)



Edited by 71redcuda (03/22/11 12:59 PM)

Top
#956350 - 03/22/11 12:25 PM Re: 15x8 with 4.5" backspacing on 1971 cuda? [Re: 71redcuda]
thedriver Offline
pro stock

Registered: 01/20/03
Posts: 1479
Loc: Outside
those wheels fit perfect on my challenger. biggest tire i could fit was a 275 60 tho.
_________________________
1973 challenger
Dana. 4 speed. Low deck.

Top
#956351 - 03/22/11 12:56 PM Re: 15x8 with 4.5" backspacing on 1971 cuda? [Re: 71redcuda]
PAINT IT BLACK Offline


Registered: 11/08/04
Posts: 7647
Loc: Houston Texas
I have 15X8 with 4.5 backspacing on my Cuda. 275/60R15 BFG TA. Fits great - better than a 7" wheel in my opinion. Gives a 1" gap between the trim ring and wheel center though. Its the only way to run an 8" wheel without relocating the springs inward. Would look weird if you did that anyway.


Attachments
6543592-DSC_01282.JPG (199 downloads)

_________________________

Top
#956352 - 03/22/11 07:15 PM Re: 15x8 with 4.5" backspacing on 1971 cuda? [Re: PAINT IT BLACK]
GomangoCuda Offline


Registered: 01/21/03
Posts: 3514
Loc: N.E. Ohio
I also have 15X8 with 4.5 BS and 275/60R15 BFG Drag Radials on a 70 Barracuda.


Attachments
6544131-DSCI0670b.jpg (164 downloads)

_________________________
Van Roy's Law: An Unbreakable Toy Is Useful For Breaking Other Toys.

Top
#956353 - 03/22/11 08:55 PM Re: 15x8 with 4.5" backspacing on 1971 cuda? [Re: 71redcuda]
davenc Offline
mopar

Registered: 05/24/05
Posts: 542
Loc: NC, USA
I would suggest searching the archives some. Everyone has a slightly different opinion of a "good fit". Fit covers both interference and appearance.

I would not expect there to be any issues with 255/60/15 on the 15X8 4.5BS wheel. A 275/60/15 on the same rim may be a slightly different story, depending on your vehicle ride height and how much suspension compression could occur during extremes of your driving.

Search for "275/60/15" in the Q&A to see an old post of mine where I expressed my opinions of fitment on a 70 Cuda.

My suggestion is to gather various opinions, look at many pictures as possible, and take lots of measurements!

Good luck!
Dave

Top
#956354 - 03/23/11 01:15 AM Re: 15x8 with 4.5" backspacing on 1971 cuda? [Re: davenc]
71redcuda Offline
pro stock

Registered: 09/16/10
Posts: 1327
Loc: Sweden
Thanks everyone!

I appreciate the help from you guys.

I will take a look in the archive also.


Top
#956355 - 03/23/11 11:25 AM Re: 15x8 with 4.5" backspacing on 1971 cuda? [Re: 71redcuda]
6PKRTSE Offline
master

Registered: 01/29/04
Posts: 3450
Loc: Motor City
That is the exact wheel on the back of my Charger with 295/50/15's on the rear.


Attachments
6545180-70RTSE11.jpg (92 downloads)

_________________________
1970 Charger R/T S.E. 440 Six Pack
1970 CHALLENGER R/T, 25.5 Cert, Big Inch Alum 16 plug HEMI twin turbo.
1970 Charger 500 S.E. 440 4 BBL
1970 Plymouth Road Runner.
1996 2500 RAM 488 V-10 4X4.
2012 Challenger R/T Classic.

Top
#956356 - 03/23/11 11:26 AM Re: 15x8 with 4.5" backspacing on 1971 cuda? [Re: 6PKRTSE]
6PKRTSE Offline
master

Registered: 01/29/04
Posts: 3450
Loc: Motor City
One more.


Attachments
6545182-1174855-DSC03677_A.jpg (128 downloads)

_________________________
1970 Charger R/T S.E. 440 Six Pack
1970 CHALLENGER R/T, 25.5 Cert, Big Inch Alum 16 plug HEMI twin turbo.
1970 Charger 500 S.E. 440 4 BBL
1970 Plymouth Road Runner.
1996 2500 RAM 488 V-10 4X4.
2012 Challenger R/T Classic.

Top

Advertisement
Forum Stats
25,495 Registered Members
32 Forums
193,119 Topics
2,254,414 Posts

Most users ever online: 1,424 @ 06/20/18 07:18 PM
Moparts Newest Topics
1970 Dodge Monaco Production Figure Source??
by DeMopuar
09/24/18 10:40 PM
Some people have life so tough
by pittsburghracer
09/24/18 10:38 PM
Pigtail setups for trapped starters
by Hot 340
09/24/18 10:03 PM
Steering parts
by Nick Stevanovski
09/24/18 09:13 PM