Topic Options
#954568 - 03/20/11 01:20 PM Fuel/Brake Lines
Mopar_Country Offline
pro stock

Registered: 04/10/10
Posts: 1216
Loc: Under My Car
I am going to put frame connectors in my Dart Sport and the fuel line is in the way on one side and brake line on the other. Is there a good source for a fuel line so I can reroute it along the inside of the frame connector when completed? Same with the brake line.

Top
#954569 - 03/20/11 01:24 PM Re: Fuel/Brake Lines [Re: Mopar_Country]
Mr T2U Offline
master

Registered: 04/03/05
Posts: 3640
Loc: new berlin wisconsin
if the car is going to the track i don't think it will pass tech if you run a line inside a frame rail. i may be wrong though.

if your are going to splice the line almost any parts store has steel and aluminum lines.


Edited by Mr T2U (03/20/11 01:26 PM)
_________________________
perception is 90% of reality

Top
#954570 - 03/20/11 01:28 PM Re: Fuel/Brake Lines [Re: Mr T2U]
Mopar_Country Offline
pro stock

Registered: 04/10/10
Posts: 1216
Loc: Under My Car
I'm not running it inside the frame rail, I want to route it along the frame connector on the inside surface versus the outer surface.

I would rather not splice if I don't have to.

Top
#954571 - 03/20/11 01:35 PM Re: Fuel/Brake Lines [Re: Mopar_Country]
Doc Fiberglass Offline


Registered: 07/04/08
Posts: 17475
LET ME ADD .... is there any place you can get steel brake-lines in larger rolls than 25 feet ?

Top
#954572 - 03/20/11 01:49 PM Re: Fuel/Brake Lines [Re: Mopar_Country]
NITROUSN Offline
I Live Here

Registered: 01/20/03
Posts: 15923
Loc: UPPER MICHIGAN, MARQUETTE COUN...
Quote:

I am going to put frame connectors in my Dart Sport and the fuel line is in the way on one side and brake line on the other. Is there a good source for a fuel line so I can reroute it along the inside of the frame connector when completed? Same with the brake line.




Its almost impossible to pull the lines through. I would install new lines first and depending on the connectors you can slot them to go over the lines. My connectors us car tool had slots in them. I painted the car first so now I will have to cut and flare in order to get them in.

Top
#954573 - 03/20/11 02:15 PM Re: Fuel/Brake Lines [Re: NITROUSN]
Mopar_Country Offline
pro stock

Registered: 04/10/10
Posts: 1216
Loc: Under My Car
Again, I am not running the line inside of the connector, I am running it along the outside on the inner side of the connector. I thought about notching the connector, I don't like the idea but I may have to.

Top
#954574 - 03/20/11 05:32 PM Re: Fuel/Brake Lines [Re: Mopar_Country]
05dakota Offline
I Live Here

Registered: 01/20/03
Posts: 17519
Loc: albany ny
i believe that was they met that doesnt meet tech if its raced

Quote:

Again, I am not running the line inside of the connector, I am running it along the outside on the inner side of the connector. I thought about notching the connector, I don't like the idea but I may have to.



Top

Advertisement
Sponsored Link
Forum Stats
25,144 Registered Members
32 Forums
186,675 Topics
2,171,810 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
Borgeson’s Quick-Ratio Modern Mopar Power Steering Conv't
by Rustymuscle
02/20/18 09:46 AM
eBay 69 Dart anyone know the car?
by Moparpete
02/20/18 09:36 AM
340 Six Pack vacuum advance
by Aar1064
02/20/18 09:07 AM
BB Autozone Duralast water pump OK?
by Exit1965
02/20/18 08:44 AM