Previous Thread
Next Thread
Print Thread
Page 2 of 9 1 2 3 4 5 6 7 8 9
Re: 37 Dodge PU - Change in Direction [Re: fstfish66] #945474
04/10/11 12:48 PM
04/10/11 12:48 PM
Joined: Aug 2003
Posts: 18,575
Dreaming of the 808
AZ_A12_BEE Offline
I Live Here
AZ_A12_BEE  Offline
I Live Here

Joined: Aug 2003
Posts: 18,575
Dreaming of the 808
Quote:

all these trucks are kool




Here is mine


69.5 A12 Bee, first purchased in 1976, car 169 on registry 69 Coronet R/T 440/4 spd 69 Coronet 500 Conv H code 383 4bbl/auto 37 Plymouth PU Find your spot on earth and ride it.
Re: 37 Dodge PU - Change in Direction [Re: AZ_A12_BEE] #945475
06/23/11 09:51 AM
06/23/11 09:51 AM
Joined: Aug 2007
Posts: 1,506
AZ
Mike P Offline OP
pro stock
Mike P  Offline OP
pro stock

Joined: Aug 2007
Posts: 1,506
AZ


Just a quick update. The Dodge got moved from the back shed (also known as the land of forgotten projects) and into the shop yesterday. At least it’s where I can get some work done on it now.

The immediate plan is to get the mockup up hemi and 518 in so a can build the floor and firewall and redo the rear suspension and hang the Dana 60. While I have the front fenders off, I’m going to take the passenger fender to a friend of mine and see if we can eliminate the spare tire well. I know I could buy fiberglass front fenders without the well, but I really want to keep the body all steel.







1957 Plymouth (Hemi, Dual Quads, A833 4 Speed 9 1/4 w 4.10) Sold
1937 Dodge Pickup (Hemi, 6X2 intake, 46RH, Dana 60 w 4.56) Sold
1968 Plymouth Valiant 2dr sedan (354 HEMI, 46RH w/4.30 gears)
Re: 37 Dodge PU - Change in Direction [Re: Mike P] #945476
06/27/11 01:45 PM
06/27/11 01:45 PM
Joined: Dec 2004
Posts: 1,757
levittown pa
fstfish66 Offline
top fuel
fstfish66  Offline
top fuel

Joined: Dec 2004
Posts: 1,757
levittown pa
kool truck


1966 barracuda prostreeter super charged 340(SOLD)
1940 dodge coupe 241 hemi street rod
2014 ram express hemi 4x4 dailey driver
2015 cherokee
2013 R/T classic
Re: 37 Dodge PU - Change in Direction [Re: fstfish66] #945477
06/27/11 03:07 PM
06/27/11 03:07 PM
Joined: Jul 2004
Posts: 1,307
Minnesota
PocketThunder Offline
pro stock
PocketThunder  Offline
pro stock

Joined: Jul 2004
Posts: 1,307
Minnesota


Will the gas filler stay in the stock location?


69 Charger R/T. California car, 99 99 Special Order paint car, Omaha Orange. Original Paint, Interior, drivetrain, etc..
Re: 37 Dodge PU - Change in Direction [Re: PocketThunder] #945478
06/27/11 03:42 PM
06/27/11 03:42 PM
Joined: Aug 2007
Posts: 1,506
AZ
Mike P Offline OP
pro stock
Mike P  Offline OP
pro stock

Joined: Aug 2007
Posts: 1,506
AZ
"....Will the gas filler stay in the stock location? ...."

No, one way or another the tank will be re-located and the hole filled.

This isn't 100% set in concrete, but more more I look at it the more I like it.

6702384-kegtank.JPG (311 downloads)

1957 Plymouth (Hemi, Dual Quads, A833 4 Speed 9 1/4 w 4.10) Sold
1937 Dodge Pickup (Hemi, 6X2 intake, 46RH, Dana 60 w 4.56) Sold
1968 Plymouth Valiant 2dr sedan (354 HEMI, 46RH w/4.30 gears)
Re: 37 Dodge PU - Change in Direction [Re: Mike P] #945479
09/05/11 11:26 PM
09/05/11 11:26 PM
Joined: Aug 2007
Posts: 1,506
AZ
Mike P Offline OP
pro stock
Mike P  Offline OP
pro stock

Joined: Aug 2007
Posts: 1,506
AZ
It’s been a while so I figured I’d post a quick update.

The mock-up engine and 518 are in,






The original floor was flat and wood, which doesn’t work real well with the 518, so I spent most of the weekend building a new floor and toe board for it.







For now the floor is bolted in, but as there is nothing that will be serviceable by taking the floor off, so I’ll be welding it in. That should keep me busy for a while.


1957 Plymouth (Hemi, Dual Quads, A833 4 Speed 9 1/4 w 4.10) Sold
1937 Dodge Pickup (Hemi, 6X2 intake, 46RH, Dana 60 w 4.56) Sold
1968 Plymouth Valiant 2dr sedan (354 HEMI, 46RH w/4.30 gears)
Re: 37 Dodge PU - Change in Direction [Re: Mike P] #945480
09/06/11 02:29 AM
09/06/11 02:29 AM
Joined: Dec 2004
Posts: 1,757
levittown pa
fstfish66 Offline
top fuel
fstfish66  Offline
top fuel

Joined: Dec 2004
Posts: 1,757
levittown pa
Quote:

It’s been a while so I figured I’d post a quick update.

The mock-up engine and 518 are in,






The original floor was flat and wood, which doesn’t work real well with the 518, so I spent most of the weekend building a new floor and toe board for it.







For now the floor is bolted in, but as there is nothing that will be serviceable by taking the floor off, so I’ll be welding it in. That should keep me busy for a while.






sweet comming along nicely,,,


1966 barracuda prostreeter super charged 340(SOLD)
1940 dodge coupe 241 hemi street rod
2014 ram express hemi 4x4 dailey driver
2015 cherokee
2013 R/T classic
Re: 37 Dodge PU - Change in Direction [Re: fstfish66] #945481
10/09/11 02:13 PM
10/09/11 02:13 PM
Joined: Aug 2007
Posts: 1,506
AZ
Mike P Offline OP
pro stock
Mike P  Offline OP
pro stock

Joined: Aug 2007
Posts: 1,506
AZ
I got the steering column connected to the rack and pinion. It would have been a pretty straight shot except for that whole engine being in the way thing.



I decided to clean out the back of the bed and put the sheetmetal back on. It’s starting to look like a truck again.







1957 Plymouth (Hemi, Dual Quads, A833 4 Speed 9 1/4 w 4.10) Sold
1937 Dodge Pickup (Hemi, 6X2 intake, 46RH, Dana 60 w 4.56) Sold
1968 Plymouth Valiant 2dr sedan (354 HEMI, 46RH w/4.30 gears)
Re: 37 Dodge PU - Change in Direction [Re: Mike P] #945482
10/09/11 06:41 PM
10/09/11 06:41 PM
Joined: Oct 2004
Posts: 16,452
Canada
CrAzYMoPaRGuY Offline
I Live Here
CrAzYMoPaRGuY  Offline
I Live Here

Joined: Oct 2004
Posts: 16,452
Canada


Looks awesome!


CrAzYMoPaRGuY
Re: 37 Dodge PU - Change in Direction [Re: CrAzYMoPaRGuY] #945483
10/09/11 07:48 PM
10/09/11 07:48 PM
Joined: Jan 2007
Posts: 1,039
Redwood City Ca.
B
B1arno Offline
super stock
B1arno  Offline
super stock
B

Joined: Jan 2007
Posts: 1,039
Redwood City Ca.
Lookin' good!

Re: 37 Dodge PU - Change in Direction [Re: Mike P] #945484
10/13/11 01:44 PM
10/13/11 01:44 PM
Joined: Dec 2004
Posts: 1,757
levittown pa
fstfish66 Offline
top fuel
fstfish66  Offline
top fuel

Joined: Dec 2004
Posts: 1,757
levittown pa
Quote:

I got the steering column connected to the rack and pinion. It would have been a pretty straight shot except for that whole engine being in the way thing.



I decided to clean out the back of the bed and put the sheetmetal back on. It’s starting to look like a truck again.










CRAZY looking steering linkage,,but very KOOL truck


1966 barracuda prostreeter super charged 340(SOLD)
1940 dodge coupe 241 hemi street rod
2014 ram express hemi 4x4 dailey driver
2015 cherokee
2013 R/T classic
Re: 37 Dodge PU - Change in Direction [Re: fstfish66] #945485
10/13/11 10:23 PM
10/13/11 10:23 PM
Joined: Aug 2007
Posts: 1,506
AZ
Mike P Offline OP
pro stock
Mike P  Offline OP
pro stock

Joined: Aug 2007
Posts: 1,506
AZ
".....CRAZY looking steering linkage,,"


It could have done it a bit more straight forward.....but that would have involved using a small block Chevy.


1957 Plymouth (Hemi, Dual Quads, A833 4 Speed 9 1/4 w 4.10) Sold
1937 Dodge Pickup (Hemi, 6X2 intake, 46RH, Dana 60 w 4.56) Sold
1968 Plymouth Valiant 2dr sedan (354 HEMI, 46RH w/4.30 gears)
Re: 37 Dodge PU - Change in Direction [Re: Mike P] #945486
10/13/11 10:52 PM
10/13/11 10:52 PM
Joined: May 2004
Posts: 4,920
Joplin, MO USA
Robbins Offline
master
Robbins  Offline
master

Joined: May 2004
Posts: 4,920
Joplin, MO USA
Sweet!


Moparlee
Re: 37 Dodge PU - Change in Direction [Re: Mike P] #945487
10/14/11 03:43 PM
10/14/11 03:43 PM
Joined: Dec 2004
Posts: 1,757
levittown pa
fstfish66 Offline
top fuel
fstfish66  Offline
top fuel

Joined: Dec 2004
Posts: 1,757
levittown pa
Quote:

".....CRAZY looking steering linkage,,"


It could have done it a bit more straight forward.....but that would have involved using a small block Chevy.




no no crazy is good,chevy is not lol


1966 barracuda prostreeter super charged 340(SOLD)
1940 dodge coupe 241 hemi street rod
2014 ram express hemi 4x4 dailey driver
2015 cherokee
2013 R/T classic
Re: 37 Dodge PU - Change in Direction [Re: Mike P] #945488
10/15/11 01:29 AM
10/15/11 01:29 AM
Joined: Jan 2003
Posts: 2,048
N.E.Ohio
P
Polarabill Offline
top fuel
Polarabill  Offline
top fuel
P

Joined: Jan 2003
Posts: 2,048
N.E.Ohio
On that spare tire well,Could you have a cover made mocking the original fender lines and use it to store ice and beer?


This would be so much easier if I knew what I was doing...
Re: 37 Dodge PU - Change in Direction [Re: Polarabill] #945489
10/15/11 07:19 AM
10/15/11 07:19 AM
Joined: Aug 2007
Posts: 1,506
AZ
Mike P Offline OP
pro stock
Mike P  Offline OP
pro stock

Joined: Aug 2007
Posts: 1,506
AZ
Bill I had actually considered that at one point and were I still building it as a street rod I might have done it

Now that it's headed more towards a traditional 60s Hot Rod and likely to see some strip time I'm just going to eliminate it. While I was waiting on steering parts I got as far as cutting the well out. Hopefully I can get a decent looking patch in it. I really want to keep the truck all steel....but if push comes to shove there is an outfit that makes fiberblass front fenders with and without the spare well.




Last edited by Mike P; 10/19/11 08:30 AM.

1957 Plymouth (Hemi, Dual Quads, A833 4 Speed 9 1/4 w 4.10) Sold
1937 Dodge Pickup (Hemi, 6X2 intake, 46RH, Dana 60 w 4.56) Sold
1968 Plymouth Valiant 2dr sedan (354 HEMI, 46RH w/4.30 gears)
Re: 37 Dodge PU - Change in Direction [Re: Mike P] #945490
10/15/11 09:15 AM
10/15/11 09:15 AM
Joined: Jan 2003
Posts: 1,331
Oregon
E
earlymopar Offline
pro stock
earlymopar  Offline
pro stock
E

Joined: Jan 2003
Posts: 1,331
Oregon
"if push comes to shove there is an outfit that makes fiberblass front fenders with and without the spare well."

If you get to that point, I have a pair for sale without the well and at a price that they couldn't touch.

- EM

Re: 37 Dodge PU - Change in Direction [Re: earlymopar] #945491
10/16/11 10:41 AM
10/16/11 10:41 AM
Joined: Aug 2007
Posts: 1,506
AZ
Mike P Offline OP
pro stock
Mike P  Offline OP
pro stock

Joined: Aug 2007
Posts: 1,506
AZ
I’ll keep that in mind EM. I might start on the patch this week, so we’ll see how it goes.

I spent last week figuring out the shifter. When I did the original mock up as a street rod I had wanted to have a column shift and rather than build a lot of mechanical linkage I modified the column for a cable, which worked well with the 727 I had in it at the time.



Going the more traditional Hot Rod route this time, I wanted something more in keeping with the 50s-60s. There wasn’t a lot out there that I liked, pretty much ratchet shifters and Lokar, neither which did much for me. I thought for a long time about using a 50’s push button shifter, but decided I did not want to give up the park feature. I eventually settled on a simple universal shifter that has been around since the 60s. I’ve seen these exact marked as Mr Gasket, B&M, Hurst and Indy over the years, but this one has no name on it. I’ve used a couple of them before and they are really not a bad unit for the cost.



First thing I had to do was get a valve body in the 518 case and fortunately thanks to the board I found out that a 727/904 body would physically bolt in to give me the manual shaft and detents (and I happened to have a junk 904 laying around).

I spent a day figuring out that straight mechanical linkage would not work because of how close the 518 is to the sides of the transmission tunnel. I eventually converted the shifter to cable. Rather than a long cable with two 180 degree loops I opted for a short cable to a bellcrank and mechanical linkage from there.






The last thing I still have to do is go into the side plate of the shifter with a die grinder and cut some additional detents so it can’t be accidentally bumped into a lower gear and provide a positive reverse lockout.




Overall the shifter gives me the look I want and feels good, especially manual upshifting.



1957 Plymouth (Hemi, Dual Quads, A833 4 Speed 9 1/4 w 4.10) Sold
1937 Dodge Pickup (Hemi, 6X2 intake, 46RH, Dana 60 w 4.56) Sold
1968 Plymouth Valiant 2dr sedan (354 HEMI, 46RH w/4.30 gears)
Re: 37 Dodge PU - Change in Direction [Re: Mike P] #945492
10/17/11 12:00 AM
10/17/11 12:00 AM
Joined: Dec 2004
Posts: 1,757
levittown pa
fstfish66 Offline
top fuel
fstfish66  Offline
top fuel

Joined: Dec 2004
Posts: 1,757
levittown pa
Quote:

I’ll keep that in mind EM. I might start on the patch this week, so we’ll see how it goes.

I spent last week figuring out the shifter. When I did the original mock up as a street rod I had wanted to have a column shift and rather than build a lot of mechanical linkage I modified the column for a cable, which worked well with the 727 I had in it at the time.



Going the more traditional Hot Rod route this time, I wanted something more in keeping with the 50s-60s. There wasn’t a lot out there that I liked, pretty much ratchet shifters and Lokar, neither which did much for me. I thought for a long time about using a 50’s push button shifter, but decided I did not want to give up the park feature. I eventually settled on a simple universal shifter that has been around since the 60s. I’ve seen these exact marked as Mr Gasket, B&M, Hurst and Indy over the years, but this one has no name on it. I’ve used a couple of them before and they are really not a bad unit for the cost.



First thing I had to do was get a valve body in the 518 case and fortunately thanks to the board I found out that a 727/904 body would physically bolt in to give me the manual shaft and detents (and I happened to have a junk 904 laying around).

I spent a day figuring out that straight mechanical linkage would not work because of how close the 518 is to the sides of the transmission tunnel. I eventually converted the shifter to cable. Rather than a long cable with two 180 degree loops I opted for a short cable to a bellcrank and mechanical linkage from there.






The last thing I still have to do is go into the side plate of the shifter with a die grinder and cut some additional detents so it can’t be accidentally bumped into a lower gear and provide a positive reverse lockout.




Overall the shifter gives me the look I want and feels good, especially manual upshifting.






dumb question,,why are you running a 904 valve body in a 518 ?


1966 barracuda prostreeter super charged 340(SOLD)
1940 dodge coupe 241 hemi street rod
2014 ram express hemi 4x4 dailey driver
2015 cherokee
2013 R/T classic
Re: 37 Dodge PU - Change in Direction [Re: fstfish66] #945493
10/17/11 07:26 AM
10/17/11 07:26 AM
Joined: Aug 2007
Posts: 1,506
AZ
Mike P Offline OP
pro stock
Mike P  Offline OP
pro stock

Joined: Aug 2007
Posts: 1,506
AZ
When I started working on truck again I didn’t have a 518 so I picked up a bare case with pan from a friend who runs a transmission shop. I didn’t occur to me at the time to get a valve body. Just to set up the shifter it really doesn’t matter what VB was in there.

I’m still looking for a donor truck to hopefully pull a good 518 out of, but if I can’t find one by the time I’m ready to actually make the truck move, I’ll just buy a rebuilt. I really don’t want to buy a rebuilt at this point as by the time the truck is ready to drive chances are any warranty would be long gone.


1957 Plymouth (Hemi, Dual Quads, A833 4 Speed 9 1/4 w 4.10) Sold
1937 Dodge Pickup (Hemi, 6X2 intake, 46RH, Dana 60 w 4.56) Sold
1968 Plymouth Valiant 2dr sedan (354 HEMI, 46RH w/4.30 gears)
Page 2 of 9 1 2 3 4 5 6 7 8 9






Powered by UBB.threads™ PHP Forum Software 7.7.1