Is it ok to put... - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Is it ok to put...

Print Thread

Is it ok to put... #86729 07/10/08 11:21 AM 07/10/08 11:21 AM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck OP Not enough dumb comments...yet
Mr.Yuck OP Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	The ECM on the fire wall next to the Volatge regulator? I've seen it done and it looks nice and like it belongs there. I usually put them on the inner fender.

Re: Is it ok to put... [Re: Mr.Yuck] #86730 07/10/08 11:23 AM 07/10/08 11:23 AM
Joined: Nov 2007 Posts: 21,814 Kirkland, Washington Pacnorthcuda Too Many Posts
Pacnorthcuda Too Many Posts Joined: Nov 2007 Posts: 21,814 Kirkland, Washington	no problem, not a bad idea to use some sort of stand-off mounting to get some air circulation around the backside but not critical in my experience Last edited by Pacnorthcuda; 07/10/08 11:27 AM.

Re: Is it ok to put... [Re: Pacnorthcuda] #86731 07/10/08 11:47 AM 07/10/08 11:47 AM
Joined: Feb 2007 Posts: 308 michigan black64 enthusiast
black64 enthusiast Joined: Feb 2007 Posts: 308 michigan	The electronics in the modules are usually design to with stand 85 degrees C or 185 degrees F underhood temps. Some of the newer designs have the 105 degree C or 221 degree F components. If the average temp in the mounting area is lower than the above it should live in that mounting location Ok.

Re: Is it ok to put... [Re: Mr.Yuck] #86732 07/10/08 02:38 PM 07/10/08 02:38 PM
Joined: Sep 2005 Posts: 6,516 Santa Cruz, California L Lefty master
Lefty master L Joined: Sep 2005 Posts: 6,516 Santa Cruz, California	I've never had any problems with them on the firewall.

Re: Is it ok to put... [Re: Pacnorthcuda] #86733 07/10/08 02:59 PM 07/10/08 02:59 PM
Joined: Jan 2003 Posts: 24,562 Brookeville, Md Mr.Yuck OP Not enough dumb comments...yet
Mr.Yuck OP Not enough dumb comments...yet Joined: Jan 2003 Posts: 24,562 Brookeville, Md	Quote: no problem, not a bad idea to use some sort of stand-off mounting to get some air circulation around the backside but not critical in my experience yeah I was thinking of making a bracket to mount it on. Thanks. Anybody got a picture?

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1