E-body dash frame: What size fasteners to attach with? - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum E-body dash frame: What size fasteners to attach with?

Print Thread

E-body dash frame: What size fasteners to attach with? #817247 09/29/10 08:39 AM 09/29/10 08:39 AM
Joined: Jan 2003 Posts: 7,327 Toronto (YYZ) Ontario YYZ OP master
YYZ OP master Joined: Jan 2003 Posts: 7,327 Toronto (YYZ) Ontario	Need to re-install the dashboard in one of the cars, have no idea what happened to the bag of fasteners. Does anyone know the sizes of the 6 bolts used to attach the dash assembly? 2 lower bolts - one behind each kick panel 4 upper bolts - 2 in each defroster vent Thanks in advance

Re: E-body dash frame: What size fasteners to attach with? [Re: YYZ] #817248 09/29/10 08:56 AM 09/29/10 08:56 AM
Joined: Mar 2007 Posts: 3,277 West Coast, USA jbc426 master
jbc426 master Joined: Mar 2007 Posts: 3,277 West Coast, USA	Not sure the sizes, but Tom at R/T Specialties can tell you and he has them. 1970 Plymouth 'Cuda #'s 440-6(block in storage)currently 493" 6 pack, Shaker, 5 speed Passon, 4.10's 1968 Plymouth Barracuda Convertible 408 Magnum EFI with 4 speed automatic overdrive, 3800 stall lock-up converter and 4.30's (closest thing to an automatic 5 speed going)

Re: E-body dash frame: What size fasteners to attach with? [Re: YYZ] #817249 09/29/10 08:59 AM 09/29/10 08:59 AM
Joined: Jun 2003 Posts: 21,397 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,397 It's a dry heat	Don't hold it to me 100% but ( I'll know for sure in the next week or so. pivot bolts under kick panels - 1/4-20 x 1" with a 1" captive washer in the vents 10-24 x 1" with a 1/2" captive washer

Re: E-body dash frame: What size fasteners to attach with? [Re: gtx6970] #817250 09/29/10 12:40 PM 09/29/10 12:40 PM
Joined: Jan 2004 Posts: 27,347 Today? Who Knows? 1_WILD_RT Management Trainee
1_WILD_RT Management Trainee Joined: Jan 2004 Posts: 27,347 Today? Who Knows?	Quote: Don't hold it to me 100% but ( I'll know for sure in the next week or so. pivot bolts under kick panels - 1/4-20 x 1" with a 1" captive washer in the vents 10-24 x 1" with a 1/2" captive washer This is correct plus the two 1/4-20 studs that mount the steering column sandwich the dash frame...

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1