Quote:

---

Either way, great score, tracks and all. Pull the back of the drivers seat and see if there is a build sheet.

---

Just pulled the seat back and no build sheet.
The upholstery is white/tan under the seat back. The seats have been spray dyed black. Not that it really matters, they need a rebuild anyway. I just hope the tracks will fit my Dart.

Quote:

---

They are a 71 or 72 mopar bucket seats. The 70 had a different back (they were 2 piece at the seat button). 73's had a soft back. They were re-upholstered since thats not a stock mopar pattern (I've never seen a pleated headrest). If someone can ID the tracks that will help narrow it down

---

I can't find any part #'s on the tracks. The inner track on the passenger seat has something stamped on it that appears to be 405 followed by some sort of symbol and then 73. I've attached a photo. Does this tell NE1 anything?

Quote:

---

They are a 71 or 72 mopar bucket seats. The 70 had a different back (they were 2 piece at the seat button). 73's had a soft back. They were re-upholstered since thats not a stock mopar pattern (I've never seen a pleated headrest). If someone can ID the tracks that will help narrow it down

---

Quote:

---

The seat tracks are definitely the big question for me.

By any chance does anyone have a '70-72 A-body seat that they can measure the track on and give me the distance between the mounting studs front to back and side to side?

---

Quote:

---

Quote:

---

The seat tracks are definitely the big question for me.

By any chance does anyone have a '70-72 A-body seat that they can measure the track on and give me the distance between the mounting studs front to back and side to side?

---

It's the height of each track that is different on many cars. The cross and f to r are usually the same

---

So then can I assume that I can use it in my '70 A-body and just make spacers if necessary?

Quote:

---

The tracks are definately 72-74 E-body as the outside flat plate on the bottom gives it away as to being E-body. Also another indication of being 72-74 is that there is not a cross over wire to unlock the inside track as there would be on the 70-71 seats. The covers were probably installed by an aftermarket company. Either way they are a good score for free. The tracks wont work in an A-body as you need the correct tracks to be higher on the outside track to fit the floor. The backs also indicate 72-74 as they are of the one piece design where the 70-71 have metal covers that hide the hinge area. The closest cover I looked at in the Legendary catalog is for the 70-71 Cuda Gran Coupe leather seat cover with the seam a couple inches from the front of the bottom cushion, but those original ones didnt have the ribs all the way up the headrest so hense the aftermarket reply. Hope this helps. Greg

---

That helps a bunch! Thanks!
Guess I'll sell the E-body tracks and try and buy a set of A-body tracks - unless there is someone out there that has a set to trade.

Quote:

---

Good luck with that.

Most E-bodies came with bucket seats so they are plentiful and not worth much. The A-body bucket seat tracks on the other hand tend to bring $240-300.00 everyday of the week when you can find them.

---

Yeah, I guess your right. Oh well, at least I've got seats. I guess that's 1/3 of the battle.

Quote:

---

The A-body bucket seat tracks on the other hand tend to bring $240-300.00 everyday of the week when you can find them.

---

Just the tracks????? If that is true, I am a rich man!

I'll sell for $1000