poly 318 and new hemi headers the same? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer poly 318 and new hemi headers the same?

Print Thread

poly 318 and new hemi headers the same? #78483 06/22/08 08:23 PM 06/22/08 08:23 PM
Joined: Feb 2003 Posts: 8,670 A Andrewh OP master
Andrewh OP master A Joined: Feb 2003 Posts: 8,670	Maybe not exactly, but I was staring at the picture of headers for the new hemi and noticed the spacing was even like the old poly. Just wondering if anyone every checked to see if they would bolt up.

Re: poly 318 and new hemi headers the same? [Re: Andrewh] #78484 06/22/08 10:28 PM 06/22/08 10:28 PM
Joined: Jan 2005 Posts: 12,419 Kalispell Mt. H HotRodDave I Live Here
HotRodDave I Live Here H Joined: Jan 2005 Posts: 12,419 Kalispell Mt.	They will not just bolt up but they are close enough you could probably cut off the flanges and weld on some flanges from the other motor. You will need to re-weld them at the proper angle because the mounting surface is more perpendicular on the poly than the new hemi. I am not causing global warming, I am just trying to hold off a impending Ice Age!

Re: poly 318 and new hemi headers the same? [Re: HotRodDave] #78485 06/23/08 12:17 AM 06/23/08 12:17 AM
Joined: Jan 2003 Posts: 3,920 n.e. pa. 6 65rbdodge master
65rbdodge master 6 Joined: Jan 2003 Posts: 3,920 n.e. pa.	FYI the spacing on the sb ford is close too.

Re: poly 318 and new hemi headers the same? [Re: 65rbdodge] #78486 06/23/08 10:15 AM 06/23/08 10:15 AM
Joined: Feb 2003 Posts: 8,670 A Andrewh OP master
Andrewh OP master A Joined: Feb 2003 Posts: 8,670	Just looked close then. Thought it might be a cheaper alternative than the spitfire or TTI. Thanks.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1