[b]Victor or AirGap?[/b] - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech [b]Victor or AirGap?[/b]

Print Thread

[b]Victor or AirGap?[/b] #691911 05/07/10 09:58 PM 05/07/10 09:58 PM
Joined: Jan 2009 Posts: 45 Iowa H Hey19 OP member
Hey19 OP member H Joined: Jan 2009 Posts: 45 Iowa	I have a steel 68 Cuda, 408 stroker edelbrock ported heads, 1 3/4 Hookers, 248-258 cam, 3500 stall 456 gears. I am running a RPM Air Gap and it does 7.0's in the 1/8th. Does anyone have any experience with the 340 victor manifold and do you think it would pick me up any in either the 1/8th or 1/4. I was originally worried about bottom end so I went with the dual plane air gap. Plus the magazine dyno articles say its the best, but that was mostly street and they didn't test a victor on a drag car.

Re: [b]Victor or AirGap?[/b] [Re: Hey19] #691912 05/07/10 10:12 PM 05/07/10 10:12 PM
Joined: Jan 2003 Posts: 6,266 Renton Washington T Triple Threat master
Triple Threat master T Joined: Jan 2003 Posts: 6,266 Renton Washington	Victor -Dustin 67 Dart, 9 second, 392" G3 Hemi 68 Barracuda 340 F/SA

Post deleted by Defbob [Re: Triple Threat] #691913 05/07/10 10:43 PM 05/07/10 10:43 PM
A Anonymous Unregistered
Anonymous Unregistered A

Re: [b]Victor or AirGap?[/b] #691914 05/07/10 11:14 PM 05/07/10 11:14 PM
Joined: Oct 2003 Posts: 7,506 Az Crizila master
Crizila master Joined: Oct 2003 Posts: 7,506 Az	Quote: Quote: Victor x2 X3 Fastest 300

Re: [b]Victor or AirGap?[/b] [Re: Crizila] #691915 05/08/10 01:50 AM 05/08/10 01:50 AM
Joined: Nov 2004 Posts: 1,745 Maryland 340_Dart top fuel
340_Dart top fuel Joined: Nov 2004 Posts: 1,745 Maryland	x4 I had a buddy running a RPM intake(basically an airgap minus the gap) on his 371 smallblock (.060 over 360) that ran 11 teens all the time. Switched to a victor and picked up .2 and 2mph, runs 10.90s now...

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1