Super Stock Springs For '63 B Body ???? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Super Stock Springs For '63 B Body ????

Print Thread

Super Stock Springs For '63 B Body ???? #65439 05/28/08 10:20 PM 05/28/08 10:20 PM
Joined: Mar 2005 Posts: 100 IL. MePlumNuts OP member
MePlumNuts OP member Joined: Mar 2005 Posts: 100 IL.	I had a set of super stock springs on my 66 coronet. I took them off when I put caltracs on the car.I had to use the rear spring front hanger bracket sets on the coronet. My question is--- Will the ss springs work on my '63 B Body and will I have to use the hangers??? The springs are for a 3400lb. car.

Re: Super Stock Springs For '63 B Body ???? [Re: MePlumNuts] #65440 05/28/08 10:31 PM 05/28/08 10:31 PM
Joined: Jan 2003 Posts: 20,748 A collage of whims topside Too Many Posts
topside Too Many Posts Joined: Jan 2003 Posts: 20,748 A collage of whims	Measure the front section of your '63 springs - centering pin to front spring eye - and if it's 20", you can use the '63s brackets. SS springs use a 20" front section.

Re: Super Stock Springs For '63 B Body ???? [Re: topside] #65441 05/30/08 04:39 PM 05/30/08 04:39 PM
Joined: Jan 2003 Posts: 27,421 Balt. Md 3 383man Too Many Posts
383man Too Many Posts 3 Joined: Jan 2003 Posts: 27,421 Balt. Md	From what I have been told the A-body SS springs will bolt right on to the 63 B-body's. Not sure if you can use the springs you have. Ron

Re: Super Stock Springs For '63 B Body ???? [Re: 383man] #65442 05/30/08 04:57 PM 05/30/08 04:57 PM
A Anonymous Unregistered
Anonymous Unregistered A	Yep, '62 & '63 use 20" front segement springs. You can use the original spring hanger and they'll bolt in. I tried using later '70 B-body leaf springs in my '63 when I swapped out the 8 3/4 housing years ago and the '70 springs were wayyy too long.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1